A. Dlouhy, K. Kuchařová, A. Orlová
Long-term creep and creep rupture characteristics of TiAl-base intermetallics
Mat. Sci. Eng. A 510-511,(2009), p. 350
|
|
Close Help | ||||||||||||||
         ZIZKOVA 22
616 62 Brno Czech Republic
ICO: 68081723
DIC: CZ68081723 |
Publications
2009
A. Dlouhy, K. Kuchařová, A. Orlová
Long-term creep and creep rupture characteristics of TiAl-base intermetallics Mat. Sci. Eng. A 510-511,(2009), p. 350 2008
Dymáček P., Milička K.:
Small punch testing and its numerical simulations under constant deflection force conditions, Strength of materials, 1/2008, pp. 32-35, ISSN 0556-171X
Kloc, Luboš, Mareček, Petr, Fiala, Jaroslav:
Creep of Zr-doped alumina at very low creep rates. Mater. Sci. Eng. A 483-484 (2008), 541-543.
A. Orlova,K. Kucharova, A. Dlouhy,
< c >-component plastic displacements in different microstructures of TiAl-base intermetallics Mat. Sci. Eng. A 483, (2008), p. 109 2007
Dobeš, Ferdinand, Milička, Karel:
Internal Stress and Activation Energy of Creep. Materials Science and Engineering A: Structural materials. Roč. 462, č. 1-2 (2007), s. 380-383. ISSN 0921-5093.
Dobeš, Ferdinand - Pérez, Pablo - Milička, Karel - Garcés, Gerardo - Adeva, Paloma: Estimation of Anisotropy of Mechanical Properties in Mg Alloys by Means of Compresive Creep Tests.
5th International Conference on Materials Structure and Micromechanics of Fracture. Abstract booklet. Brno: UTIUM, 2007 - (Šandera, P.) S. 169-169. ISBN 978-80-214-3434-9.
Dobeš, Ferdinand, Kratochvíl, P., Milička, Karel:
Compressive Creep of Fe3Al-type Iron Aluminide with Zr Additions. 5th International Conference on Materials Structure and Micromechanics of Fracture. Abstract booklet. Brno: VUTIUM, 2007 - (Šandera, P.) S. 104-104. ISBN 978-80-214-3434-9.
Kratochvíl, P., Dobeš, Ferdinand, Milička, Karel, Pešička, Josef:
The Change of the Mechanical Properties and of the Structure of the Alloy during Gradual Approach of its Composition from Fe-40Al to Fe-43Al-4C (at. %). Discussion Meeting on the Development of Innovative Iron Aluminium Alloys /4./. Duebendorf : EMPA - Materials Science and Technology, 2007 - (Palm, M.; Spiegel, M.; Stein, F.; Krein, R.) S. 42-42.
Dobeš, Ferdinand, Milička, Karel, Kratochvíl, P., Pešička, Josef:
The Internal and Threshold Stresses in Creep of Fe-30Al-4Cr Intermetallic Alloy with Zr Addition. Discussion Meeting on the Development of Innovative Iron Aluminium Alloys /4./. Duebendorf : EMPA - Materials Science and Technology, 2007 - (Palm, M.; Spiegel, M.; Stein, F.; Krein, R.) S. 59-59.
Vodičková, V., Kratochvíl, P., Dobeš, Ferdinand:
The effect of carbon on the structure of Fe-40Al-xC (at.%). Kovové materiály. Roč. 45, č. 3 (2007), s. 153-158. ISSN 0023-432X
Dobeš, Ferdinand, Milička, Karel, Besterci, M.:
Small Punch Testing of Al-4 vol. % Al4C3 Composite in Creep Conditions. High Temperature Materials and Processes. Roč. 26, č. 3 (2007), s. 193-199. ISSN 0334-6455
Dymáček P., Milička K.:
Influence of parameters of the arrangement on results of the small punch test, Materials Engineering XIV, 3/2007 (2007), s. 181-185. ISSN 1335-0803
Milička, Karel - Dobeš, Ferdinand:
Constitutive description of creep behaviour of Mg-4Al-1Ca alloy. 5th International Conference on Materials Structure and Micromechanics of Fracture. Abstract booklet. Brno: VUTIUM, 2007 - (Šandera, P.) S. 46-46. ISBN 978-80-214-3434-9.
Orlová, Alena, Dobeš, Ferdinand:
Contributions to Internal Stress from Free Dislocations and from Substructure Boundaries in Dislocation Structure Formed in High Temperature Creep. 5th International Conference on Materials Structure and Micromechanics of Fracture. Abstract booklet. Brno: VUTIUM, 2007 - (Šandera, P.) S. 140-140. ISBN 978-80-214-3434-9. 2006
Dobeš F, Kratochvíl P, Milička K.
Creep of cast Fe-36Al-2Ti alloy Intermetallics 14: 1199-1203, 2006
Zehetbauer M, Schafler E, Dobeš F, Milička K.
A critical analysis of the composite model as applied to high-temperature creep of Al and an Al-Mg alloy Zeitschrift für Metallkunde 97: 329-335, 2006
Dobeš, Ferdinand. - Perez, Pablo - Milička, Karel - Garces, Gerardo - Adeva, Paloma:
Influence of Specimen Orientation on Creep of Mg–10 Vol. % Ti PM -Composite. Proceedings of the 7th International Conference on Magnesium Alloys and Their Application. Weinheim : WILEY-VCH, 2007 - (Kainer, K.) pp. 699-703.
Dobeš, Ferdinand. - Kratochvíl, Petr - Milička, Karel - Pešička, Josef:
The effect of carbon on high temperature deformation of Fe40Al based alloys. 3rd Discussion Meeting on the Development of Innovative Iron Aluminium Alloys. Duesseldorf Max Planck Institute fuer Eisenforschung, 2006. p. 36
Dymáček P.:
Numerical Simulation of Small Punch Test using FEM, Seminar Life of Materials and Structures 2006, Brno, Czech Republic, March 21, 2006, pp. 131-137
Dymáček P.:
Parametric study of the small punch test technique under constant deflection rate conditions, Proceedings of the grant workshop New methods of damage and failure analysis of structural parts, TU of Ostrava, September 4-8, 2006, pp. 269-275
Kloc L., Sklenička V.:
Creep of 0.5CrMoV Steel at Very Low Strain Rates in: J. Lecomte-Beckers et al. (eds.): Materials for Advanced Power Engineering 2006 Forschongszentrum Julich 2006, vol. II, p. 1011
Milička K., Dobeš F.
Small punch testing of P91 steel International Journal of Pressure Vessels and Piping 83: 625-634, 2006
Milička, Karel - Dobeš, Ferdinand:
Threshold creep behaviour of Mg-alloy matrix composites with short fibres. Proceedings of the 7th International Conference on Magnesium Alloys and Their Application. Weinheim : WILEY-VCH, 2007 - (Kainer, K.) pp. 947-952. 2005
F. Dobeš, A. Orlová:
Dip-test internal stress and the composite model of creep deformation Materials Science Forum 482: 291-294, 2005.
L. Kloc and J. Fiala:
Viscous creep in metals at intermediate temperatures Kovove Mater. 43 (2005) 105-112
L. Kloc, J. Fiala:
Harper-Dorn creep in metals at intermediate temperatures revisited: Constant structure test of pure Al. Mater. Sci. Eng. 410-411 (2005), 38-41
K. Milička, F. Dobeš:
Directional creep behaviour of two magnesium alloy base composites with fibres. Kovove Mater. 43: 45-54, 2005
K. Milička, F. Dobeš:
Relation between uniaxial and equi-biaxial creep and creep fracture behaviour in P91 steel. Materials Science Forum 482: 407-417, 2005
A. Orlová, K. Kuchařová, A. Dlouhý:
Microstructural mechanisms of creep in gammaTi-52Al Kovove Mater. 43: 55-65, 2005 2004
F. Dobeš, K. Milička, P. Kratochvíl:
Small punch creep in Fe28Al3Cr0.02Ce alloy Intermetallics 12: 1397-1401, 2004.
F. Dobeš, K. Milička:
Comparison of thermally activated overcoming of barriers in creep of aluminum and its solid solutions Materials Science and Engineering A 387-389: 595-598, 2004.
L. Kloc and V. Sklenička:
Confirmation of low stress creep regime in 9% chromium steel by stress change creep experiments Mater. Sci. Eng. A 387-389 (2004) 633-638
L. Kloc and V. Sklenička:
Importance of the loading history in creep of 9% Cr steel Proc. of International Conference BALTICA VI Life Management and Maitenance for Power Plants VTT Symposium 234, VTT, Espoo, Finland 2004, pp. 491-498
K. Milička, F. Dobeš:
The high-temperature characterisation of welded joints using small-punch testing. Material & Technology 38: 9-12, 2004
K. Milička, F. Dobeš:
Creep behaviour of a magnesium alloy AS21 and its fibre-strengthened composite. J. Alloys and Compd. 378: 167-171, 2004
A. Orlová, K. Kuchařová, A. Dlouhý:
Zeitschrift fur Metallkunde 95 (2004) 1011-1019
A.Orlová, F. Dobeš:
On the stress-subgrain size relationships derived from the composite model of dislocation structure Mater. Sci. Engng. A381: 171-174, 2004
A. Orlová:
Relation between the internal stress measured in creep and the stress generated by the dislocation structure in the fcc metals Philos. Mag. 84: 3419-3426, 2004
A.Orlová, K. Kuchařová, A. Dlouhý:
Evolution of microstructure during creep in gamma Ti-52Al at 1100K and high applied stresses Z. Metallkde 95: 1011-1019, 2004
J. Čadek, K. Kuchařová, K. Milička:
Journals of Alloys and Compouds, 378 (2004) 123-126
J. Čadek, K. Kuchařová, K. Milička:
Creep in copper dispersion strengthened with fine alumina particles and reinforced with alumina short fibres - an ODS copper matrix composite. J. Alloys and Compd. 378: 123-126, 2004
J. Buršík, V. Buršíková, V. Navrátil and K. Milička. Effect of the creep deformation on the microstructure and indentation response of leaded brass. Acta Metallurgica Slovaca 10 (2004) 829-831.
2003
L. Kloc and V. Sklenička:
Residual Crepp Life Assessment - is the Current Approach Viable? in: R. K. Penny (ed.): Asset Management of Aged Plant and Materials: Assessment Methods. Proceedings of the CAPE 2003 conference, pp. 235-244. EMAS Publishing Ltd. Sheffield, U.K. 2003.
K. Milička, F. Dobeš:
Application of small punch tests in analysis of mechanical behaviour of composites with magnesium alloy matrix. Proceedings of the International Conference ADVANCED METALLIC MATERIALS. Smolenice, Slovakia, 5. - 7. 11. 2003. Ed. Jerz, J.; Šebo, P.; Zemánková, M. Bratislava, Institute of Materials and Machine Mechanics 2003, p. 202.
K. Milička, F. Dobeš, E. Schafler, M. Zehetbauer:
Comparison of X-ray line profile and dip tests measurements of internal stresses during high temperature creep of copper. Kovove Mater. 41: 133-144, 2003
A.Orlová:
Use of constitutive description in an interpretation of creep in Ti-52Al intermetallic Intermetallics 11: 501-506, 2003
A.Orlová, F. Dobeš:
Internal stress and heterogeneous dislocation structure in creep Philos.Mag. 83: 2681-2691, 2003 2002
F. Dobeš, K. Milička:
On the Monkman-Grant relation for small punch test data Materials Science and Engineering A336: 245-248, 2002.
F. Dobeš, K. Milička:
Analysis of creep in long range ordered CuZn in terms of thermally activated overcoming of barriers Materials Science and Engineering A324: 73-76, 2002.
L. Kloc, J. Fiala and V. Sklenička:
On the Strengthening Factors of Structural Steels under Low Stress Creep Regime Chem. Listy 96(S) (2002), 212-214
CHLUPOVÁ A, DYMÁČEK P: Mechanical behaviour of hybrid laminates with carbon fibers. Metallic Mater. 40 (2002) 195–208 (in Czech).
M. Kvapilová, A.Orlová:
Traces of non-compact glide in the dislocation structure of copper after creep at high temperatures Mater. Sci. Engng. A328: 277-282, 2002 2001
F. Dobeš, K. Milička:
Small Punch Testing in Creep Conditions Journal of Testing and Evaluation 29: 31 - 35, 2001.
L. Kloc, V. Sklenička and J. Ventruba:
Comparison of low stress creep properties of ferritic and austenitic creep resistant steels Mater. Sci. Eng. A319-321 (2001), 774-778
L. Kloc and V. Sklenička:
Viscous Creep Regime in Creep Resistant Steels Proc. of the 7th European Conference on Advanced Materials and Processes EUROMAT 2001 AIM, Milano 2001. Paper #752
L. Kloc and V. Sklenička:
Reliability Problems in Methods of Residual Creep Life Assessment Proc. of the 10th International Conference Creep Resistant Metallic Materials Vítkovice R&D, Ostrava 2001
K. Milička, Z. Trojanová, F. Dobeš, P. Lukáč
Application of small punch tests in the determination of mechanical properties of magnesium alloys and composites. Euromat 2001, Rimini, paper 247.
K. Milička, F. Dobeš:
Comparison of small punch tests performed on exposed power plant part. Baltica V, Condition and Life Management for Power Plants. S. Hietanen and P. Auerkari (eds.), Vol. I, p. 383-393. Technical Research Centre of Finland, Espoo, 2001
A.Orlová:
Comparison of Cu and Ti-52Al in creep at the same homologous temperature and minimum creep rate Intermetallics 9: 529-534, 2001 |
|
Last update
26. 08. 2009 |