IPM - High Cycle Fatigue Group

Publications

2009

P. Lukáš, L. Kunz, M. Svoboda: Fatigue mechanisms in ultrafine-grained copper. Kovove Materialy-Metallic Materials 47 (2009), 1-9.

Hutař, P., Náhlík, L., Knésl, Z.: Quantification of the influence of vertex singularities on fatigue crack behavior. Computational Materials Science, Volume 45, Issue 3, May 2009, Pages 653-657

2008

Majer Z., Hutař P., Náhlík L., Knésl Z. The influence of loading direction on micro-crack behaviour in polymer composite, Applied and Computational Mechanics, Vol. 2, No. 2, 285-290, 2008

Klusák, J., Profant, T., Kotoul, M.: A comparison of two direct methods of generalized stress intensity factor calculations of bi-material notches, Key Engineering Materials Vols. 385-387 (2008) pp 409-412

Knésl, Z., Náhlík, L., Bareš, P. Crack initiation kriteria for singular stress concentrators, Part IV: Applications to fracture of coated structures. Engineering Mechanics, Vol. 15, No. 4, p.263-270, 2008.

Buksa, M.: Fatigue properties of ultrafine-grained materials. (in Czech). PhD thesis, 2008.

Mintách, R.: Fatigue properties of Ni base superalloys at high mean stress. (in Czech). PhD thesis, 2008.

KUNZ, L., LUKÁŠ, P., MINTÁCH, R.: Effect of Vibrations on Lifetime of Ni Base Single Crystals Subjected to Tensile Stress. MSMF-5 (106/05/2112). Mater. Sci. Forum 567-568 (2008) 293-296.

KUNZ, L., LUKÁŠ, P., MINTÁCH, R., KONEČNÁ, R.: High-Cycle Fatigue of IN 713LC. Proceedings of ECF17 Brno 2008, CD, 945-951.

XU, Ch., WANG, Q., ZHENG, M., LI, J., HUANG, M., JIA, Q., ZHU, J., KUNZ, L., BUKSA, M.: Fatigue Behavior and Damage Characteristics of Ultra-Fine Grain Low-Purity Copper Processed by Equal-Channel Angular Pressing (ECAP). Mater. Sci. Eng. A475 (2008) 249-256.

KUNZ, L., LUKÁŠ, P., KONEČNÁ, R.: Fatigue Properties of Superalloy IN 713LC and Relation to Microstructure. Materials Science 14 (2008) 3, 221-225.

KUNZ, L., LUKÁŠ, P., BOKŮVKA, O.: Fatgiue Behaviour of Ultrafine-Grained Copper in Very High Cycle Fatigue Regime. Materiálové inžinierstvo 15 (2008) 4, 1-5.

KONEČNÁ, R., KUNZ, L.: Largest Extreme Value Distribution Analysis of Casting Defects in Superalloy in713LC. Materiálové inžinierstvo 15 (2008) 4, 6-10.

Náhlík, L., Hutař, P., Knésl, Z., Transverse cracking of layered structures: evaluation of fatigue crack propagation, Materials Science Forum, Vols. 567-568, pp. 221-224, 2008

Náhlík, L., Šestáková, L., Hutař, P., Estimation of the crack propagation direction of a crack touching the interface between two elastic materials, Materials Science Forum, Vols. 567-568, pp. 225-228, 2008

Náhlík, L., Šestáková, L., Hutař, P. Numerical Investigation of Stress Singularities in Cracked Bimaterial Body. Key Engineering Materials, Vols. 385-387 pp. 125-128, 2008

Náhlík, L., Knésl, Z., Klusák, J. Crack initiation kriteria for singular stress concentrators. Part III: An aplication to a crack touching a bimaterial interface. Engineering Mechanics, Vol. 15, No. 2, pp. 99-114, 2008

Náhlík, L., Šestáková, L., Hutař, P. Crack propagation in the vicinity of the interface between two elastic materials. Sborník The first African InterQuadrennial ICF (International conference on Fracture) conference, Alger, Alžírsko, 2008.

Náhlík, L. Šestáková, L., Hutař, P. Estimation of apparent fracture toughness of ceramic laminates based on generalized strain energy density factor. European Conference on Fracture (ECF-17), p. 1522-1529, Brno, 2008.

Seitl, S., Knésl, Z. Two Parameter Fracture Mechanics: Fatigue Crack Behavior under Mixed Mode Conditions, Engineering Fracture Mechanics, Volume 75, Issues 3-4, 857-865, 2008

Seitl, S. Řoutil, L., Klusák, J., Veselý, V.: The influence of the shape of a saw-cut notch in quasi-brittle 3PB specimens on the critical applied force, Applied and Computational Mechanics 2 (1), 2008, 123-132, ISSN: 1802-680X

SEITL, S., KEŠNER, Z., ŘOUTIL, L., KNÉSL, Z. Selected fatigue and fracture parameters of glass fiber cement based composite. 8th International Symposium on Utilization of High-Strength and High-Performance Concrete, Japansko, 2008, p. 363–368.

LUKÁŠ, P., KUNZ, L., SVOBODA, M.: Overview of Fatigue Behaviour of Ultrafine-Grained Copper Produced by Severe Plastic deformation. Mater. Sci. Forum 567-568 (2008) 9-16.

P. Lukáš, L. Kunz, M. Svoboda, M. Buksa, Q. Wang: Mechanisms of cyclic plastic deformation in ultrafine-grain copper produced by severe plastic deformation. In: Plasticity, Failure and Fatigue in Structural Materials
– from Macro to Nano, Publication of TMS, Warrendale 2008, pp. 161-166.

P. Lukáš, L. Kunz, M. Svoboda: Fatigue of ultrafine-grained copper. Plenary lecture at LCF6, Berlin,8-12 September 2008. Proceedings: 6th International Conference on Low Cycle Fatigue, eds. P.D. Portella, T.Beck, M. Okazaki, DVM Berlin, 2008, pp. 295- 305.

P. Lukáš, L. Kunz, M. Svoboda: Od fyzikálních základů studia struktury pevných látek k monokrystalům superslitin pro plynové turbíny. Čs. Čas. Fyz. 58 (2008), 81-83.

Hutař, P., Náhlík, L., Knésl, Z. The effect of the singularity induced by the free surface on fatigue crack growth in thin structures. Key Engineering Materials, Vols. 385-387 pp. 317-320, 2008

Hutař, P., Náhlík, L., Knésl, Z., Seitl, S. The influence of vertex singularities on fatigue crack shape. European Conference on Fracture (ECF-17), p. 1060-1066, Brno, 2008.

Hutař P., Náhlík L., Fatigue crack shape prediction based on vertex singularity, Applied and Computational Mechanics, Vol. 2, No.1, 45-52, 2008

2007

Majer, Z., Hutař, P., Náhlík, L., Knésl, Z., Influence of particle-matrix interphase on stress distribution in particulate composite with polymer matrix, Applied and Computational Mechanics, Vol.1, 143-148, 2007

Šestáková, L., Náhlík, L., Hutař, P., Knésl, Z., Fracture mechanics parameters of multilayer pipes, Applied and Computational Mechanics, Vol. 1, 299-306, 2007

Klusák, J., Knésl, Z.: Determination of crack initiation direction from a bi-material notch based on the strain energy density concept, Computational Materials Science (2007), Volume 39, issue 1, pp. 214-218.

Klusák, J., Knésl, Z., Náhlík, L. Crack initiation criteria for singular stress concentrations, Part II: Stability of sharp and bi-material notches, Vol. 14, No. 6, pp. 409-422, 2007

Knésl, Z., Klusák, J., Náhlík, L. Crack initiation criteria for singular stress concentrations, Part I: A universal assessment of singular stress concentrations, Vol. 14, No. 6, pp. 399-408, 2007

Knésl, Z., Hutař, P., Náhlík, L., Nezbedová, E., Vlach, B., Role of particle size and filler matrix on stress state in thermoplastic composites, Computational modeling and experiment of composite materials, Liptovský Mikuláš, 2007

Kunz, L., Lukáš, P., Buksa, M., Wang, Q., Zheng, M.: Microstructural Response of Ultrafine-Grained Copper to Fatigue Loading. Acta Metallurgica Slovaca 13 (2007) 512-518.

Kunz, L., Lukáš, P.: Deformation Behaviour and Fracture of Ni-Based Single Crystals at Simultaneous Action of High-Cycle Fatigue and Creep. Materálové inžinierstvo 14 (2/2007) 15-20

Kunz, L., Lukáš, P., Z. Zúberová: Únava ultrajemnozrnných materiálů. Materálové inžinierstvo 14 (3/2007) 8 – 12.

Zúberová, Z., Kunz, L., Lamark, T. T., Estrin, Y., Janeček, M.: Fatigue and Tensile Behaviour of Cast, Hot Holled and Severely Plastically Deformed AZ31 Magnesium Alloy. Metallurgical and Material Transactions 38A (2007) 1934-1940.

Wang, Q., Xu, Ch., Zheng, M., Zhu, J., Buksa, M., Kunz, L.: Fatigue Property of Ultrafine-Grained Copper Produced by ECAP. Acta Metallurgica Sinica 43 (2007) 498-502.

Náhlík, L., Hutař, P., Knésl, Z., The influence of loading ratio on fatigue crack propagation through a bi-material interface, Key Engineering Materials, Vols. 348-349, 317-320, 2007

Seitl S., Hutař, P.: Fatigue crack propagation near threshold region in framework two-parameter fracture mechanics, Journal Materials and Technology, 2007, 41(3), 135-138

Seitl, S., Klusák, J., Keršner, Z.: The influence of a notch width on a crack growth for various configurations of three-point bending specimens, Materials Engineering Vol. 14, No. 3, pp. 213-219, 2007

Lukáš, P., Kunz, L., Svoboda, M.: Effect of Low Temperature on Fatigue Life and Cyclic Stress-Strai.n Response of UFG Copper. Metallurgical and Material Transactions 38A (2007) 1910-1915.

Lukáš, P., Kunz, L., Svoboda, M.: Fatigue Behavior of Ultrafine-grained Copper in Very High Cycle Fatigue Regime. In: Proc. of Fourth Int. Conf. On Very High Cycle Fatigue, TMS Publication, J.E. Allison et al., eds., TMS (2007), 265-270.

Hutař, P., Náhlík, L., Knésl, Z., Numerical investigations of corner singularities in cracked bodies, Key Engineering Materials, Vols. 348-349, 377-380, 2007

Hutař, P., Náhlík, L., Knésl, Z., Kunz, L., Matušek, P., Model analysis of fatigue crack growth during EN 13262 wheel standard testing, 15 International Wheelset Congress, Praha, 2007

2006

Majer, Z. Numerical analysis of surface crack growth in protective layers. Master degree thesis, 2006.

Šestáková, L. Influence of surface cracks on delamination between protective layer and material of substrate. Master degree thesis, 2006.

Klusák, J., Knésl, Z.: A Bi-material Wedge – a Model for the Prediction of Failure Initiation at Shape and Material Discontinuities. Key Engineering Materials Vols. 324-325 (2006), pp. 1305-1308.

Knésl, Z., Náhlík, L., Bareš, P. Failure behaviour of coated structures. Journal of Computational and Applied Mechanics, Vol. 7, No. 2, 2006.

Knésl, Z., Hutař,P., Seitl, S.: Constraint aspects of the evaluation of fatigue test results in Paris region, Communication 2006, Volume 4: pp. 25-28.

Kunz L., Lukáš P., Svoboda M., Buksa M., Zheng M.: Cyclic Plastic Behaviour of UFG Copper Prepared by ECAP. In: Proc. Nanoved 2006, 14-17 May, Stará Lesná, Slovakia 2006.

Buksa M.; Kunz L.; Svoboda M., Wang Q., Zheng M.: Fractography, Initiation and Propagation of Fatigue Cracks in UFG Copper. In: Proc. Fractography 2006, 15-18 October, Stará Lesná, Slovakia 2006, pp. 173-180.

Mintách, R., Kunz, L., Svoboda, M. Fatigue crack initiation in INCONEL 713 LC at high temperature, Fractography 2006, Stará Lesná, Slovakia 2006, pp. 140.

Kunz, L., Lukáš, P., Svoboda, M.: Fatigue Strength, Microstructural Satability and Strain Localization in Ultrafine-grained Copper. Mat. Sci. Eng. A424 (2006) 97-104.

Kunz, L., Lukáš, P., Mintách, R., Hrbáček, K.: Effect of Mean stress on High-Cycle Fatigue Strength on IN 713 LC Superalloy. Kovové Materiály 44 (2006) 275-281.

Bokůvka, O., Nový, F., Činčala, M., Kunz, L.: Gigacyklová únava konštrukčných materiálov. Acta Mechanica Slovaca 10 (2006) 53 - 58.

Kunz, L., Lukáš, P., Činčala, M., Nicoletto, G.: Fatigue Lifetime of Bearing Steel in Ultra-High-Cycle Region. In: Proc. of the ECF16 Conference, Alexandroupolis, Greece 2006. CD Fracture of Nano and Eng. Mater. and Struct., E.E. Gdoutos, ed. Springer 2006.

Kunz, L., Lukáš, P., Mintách, R., Hrbáček, K.: Effect of Mean Stress on High-Cycle Fatigue Strength of IN 713 LC Superalloy. Kovové Materiály 44 (2006) 275-281.

Náhlík, L., Hutař, P., Knésl, Z. Influence of residual stresses on threshold values for crack propagation through an interface between two materials. Key Engineering Materials, Vol. 325, p. 1153-1156, 2006.

Náhlík, L. Estimation of the fatigue threshold values for a crack propagating through a bi-material interface taking into account residua stresses. Materials and Technology (Materiali in Tehnologije), Vol. 40, No. 4, p. 157-160, Ljublana 2006.

Lukáš, P., Kunz, L., Svoboda, M.: Fatigue strength of ultrafine-grained copper. FATIGUE 2006, Proc. 9th International Fatigue Congress, 2006, Paper FT 62, 10 pages.

Hutař, P., Knésl, Z., Relation between constraint and fatigue crack growth rate, Fatigue 2006, Atlanta, 2006.

Hutař, P., Seitl, S., Knésl, Z., Effect of constraint on fatigue crack propagation near threshold in medium carbon steel, Computational materials Science, Vol. 37, 51-57, 2006.

Hutař, P., Sauzay, M., Simulation of fatigue crack growth by crack tip blunting, 16th European Conference of Fracture, Alexandroupolis, Greece, 2006.

2005

J. Klusák, Z. Knésl: Assessment of a bi-material wedge with two stress singularities. In: Advances in Fracture and Damage Mechanics IV, eds. M.H.Aliabadi et al., EC, ltd, UK, ISBN:0-9547783-1-6, 2005, pp. 211-216.

Z. Knésl, L. Náhlík, P. Bareš: Failure behaviour of coated materials. Numerical methods in continuum mechanics, CD-rom proceedings, Žilina, 2005.

Z. Knésl, P. Bareš, L. Náhlík. Evaluation of the fatigue threshold of coated structures. Twelfth Annual international Conference on Composites/Nano Engineering, ed. D.Hui, CD-rom edition, Tenerife 2005.

Z. Knésl, J. Klusák, L. Náhlík: Fracture mechanics parameters of general singular stress concentrators. International scientific conference held on the occasion of the 55th anniversary of founding the Faculty of Mechanical Engineering of the VSB – Technical University of Ostrava, Session 8 – Applied Mechanics, Ostrava 2005, pp. 385-390.

Z. Knésl, L. Náhlík: Resistance of coated structures to failure. Conference Coatings Science International 2005, Book of Abstracts, Noordwijk, Netherlands 2005, pp.161-164.

Z. Knésl, P. Bareš: Fracture conditions for a crack terminating at the interface of two elastic materials. 10. Tagung Problemseminar Deformation und Bruchverhalten von Kunststoffen, Merseburg, Cd-rom edition, Merseburg 2005.

R. Mintách, L. Kunz, K. Hrbáček: Influence of Tensile Mean Stress on Fatigue Lifetime of Cast Superalloy IN713 LC. In: Sborník z konf. TRANSCOM 2005, Vol.5, p. 23-26.

L. Kunz, P. Lukáš, M. Svoboda and O. Bokůvka: Fatigue behaviour of ultrafine-grained copper, Materiálové inžinierstvo 12, 2005, pp. 2-6.

M. Buksa, L. Kunz, M. Svoboda: Slip bands and early crack propagation in ultrafine-grained copper. Sborník z mezinárodní konference studentů a mladých vědeckých pracovníků TRANSCOM 2005, p. 19-22.

M. Buksa, L. Kunz, M. Svoboda: Cyclic stress-strain response and changes of microstructure of ultrafine-grained copper. Sborník z konf. Juniromat 05, Brno 2005, p.152-162.

M. Buksa, L. Kunz, M. Svoboda: Stability of microstructure of ultrafine-grained copper during cyclic loading. Sborník z konf. Víceúrovňový design pokrokových materiálů, Brno 2005, p. 131-138.

L. Kunz, P. Lukáš. Y. Estrin, Z. Zúberová: Notch sensitivity of cast AZ31 magnesium alloy. Materiálové inžinierstvo 12 (2005) 88-91.

L. Náhlík, Z. Knésl, F. Kroupa: Interaction of a crack in the plasma-sprayed ceramic coating with the metal substrate. Materials Science Forum, Vol. 482, 2005, pp. 223-226.

P. Lukáš, L. Kunz and M. Svoboda: Fatigue notch sensitivity of ultrafine-grained copper, Mat.Sci.Eng. A391, 2005, pp. 337-341.

P. Lukáš, L. Kunz, M. Svoboda and J. Čadek: Effect of structure on creep behaviour of superalloy single crystals, Mater. Sci. Forum 482, 2005, pp. 267-270.

P. Lukáš, J. Čadek, L. Kunz, M. Svoboda, J. Klusák: Creep resistance of single crystal superalloys CMSX-4 and CM186LC. Kovove Mater. 43, 2005, pp. 5-19.

P. Lukáš, L. Kunz and M. Svoboda: High-temperature ultra-high cycle fatigue damage of notched single crystal superalloys at high mean stresses. Int.J.Fatigue 27, 2005, pp. 1535-1540.

Hutař, P., Seitl, S., Knésl, Z., The role of the constraint in the case of short cracks, Material Science Forum, Vol. 482, 2005, pp. 303-306

2004

J. Klusák, Z. Knésl: Determination of crack initiation direction from a bi-material notch based on the strain energy density concept. In: Conference proceedings ICCES'04, [CD-ROM] ISBN: 0-9657001-6-X, 2004.

L. Kunz, P. Lukáš: LCF-creep interaction in 9%Cr steel at 600 °C. In: Fifth International Conference on Low Cycle Fatigue LCF5, eds. P.D.Portella, H.Sehitoglu, K.Hatanaka, DVM, Berlin 2004, pp. 239-244.

L. Náhlík: Crack trapping in the interface between matrix and inclusion. Engineering Mechanics, Vol. 11, No. 5, ISSN 1210-2717, 2004, pp. 371-375.

F. Kroupa, L. Náhlík, Z. Knésl: Crack growth in thermally sprayed ceramic coatings. Acta Technica CSAV 49, No. 2, 2004, pp. 149-168.

S. Seitl, P. Hutař, Z. Knésl: Calculation and assessment of constraint for short fatigue cracks. Materials Engineering, Volume 11, No.4, 2004, pp. 7-12.

P.Lukáš and L.Kunz: Role of persistent slip bands in fatigue, Phil.Mag., 84, 2004, pp. 317-330.

P. Lukáš, L. Kunz and M. Svoboda: High cycle fatigue of superalloy single crystals at high mean stress, Mat.Sci.Eng. A 387-389, 2004, pp. 505-510.

P. Hutař, S. Seitl, Z. Knésl: Quantification of the effect of specimen geometry on the fatigue crack growth response by two-parameter fracture mechanics. Materials Science and Engineering, A 387-389, 2004, pp.491-494.

P. Hutař, S. Seitl, Z. Knésl: Effect of constraint on fatigue crack propagation near threshold in medium carbon steel. 14th International Workshop on Computational Mechanics of Materials, Goa, India, 2004.

P. Hutař, S. Seitl, Z. Knésl: The role of constraint in the case of short cracks. Materials Science Forum, Vol. 482, 2004, pp. 303-306.

2003

Z. Knésl, L. Náhlík, J.C Radon: Influence of interface on fatigue threshold values in elastic bimaterials. Computational Materials Science 28, 2003, pp. 620-627.

L. Nešpůrek, Z. Knésl: Stress singularity at intersection of crack front and free body surface. IXth International Conference on Numerical Methods in Continuum Mechanics, Žilina 2003, CD ROM.

Z. Knésl, L. Náhlík, J.C. Radon: Influence of coating cracking on substrate failure. Tenth Annual international Conference on Composites/Nano Engineering, ed. D.Hui, New Orleans (2003),p. 347.

Z. Knésl, P. Preclík, J.C. Radon: Two-parameter characterization of notched specimen under creep. Metallic Materials (Kovové Materiály), 41 (2003), pp. 84-96.

L. Kunz, P. Lukáš, P. Matušek: An experimental study of fatigue behaviour of rubber segments for low-noise railway wheels. In: Proc. 20th Danubia-Adria Symposium on Experimental Methods in Solid Mechanics. Hungarian Society of Mech. Engng., Gyor, Hungary, 2003, pp. 230-231.

P. Lukáš and L. Kunz: Small cracks – nucleation, growth and implication to fatigue life, Int.J.Fatigue, 25, 2003, pp. 855-862.

2002

J. Klusák, Z. Knésl: Evaluation of the threshold values for the propagation of a fatigue crack starting at a V-notch. Computer Assisted Mechanics and Engineering Science, 9 (2002), pp. 459-468.

Z. Knésl, S. Seitl, P. Hutař: Accounting for effects of constraint on propagation of a fatigue crack. Damage and Fracture Mechanics VII (Computer Aided Assessment and Control), eds. C.A.Brebbia, S-I. Nishida, WIT Press, Southampton 2002, p.245.

J.C. Radon, Z. Knésl: Creep and fatigue crack propagation at high temperatures. Materials Enginnering (Materiálové inženýrstvo), Vol.9, 2002, 1-8.

E. Czoboly. Z. Knésl, J.C. Radon: Creep and fatigue crack growth at elevated temperatures. Journal for Material Testing, 2002, No.4, pp.103-109.

L. Kunz and P. Lukáš: High temperature fatigue and cyclic creep of P91 steel. In: Temperature-Fatigue Interaction, L. Rémy and J. Petit (eds.), ESIS Publication 29, Elsevier, Amsterdam, 2002, pp. 37-44.

P. Lukáš, L. Kunz: Cyclic plasticity and substructure of metals. Mat. Sci. Eng., Vol. A322, 2002, pp. 217-227.

P. Lukáš, P. Preclík, L. Kunz, J. Čadek and M. Svoboda: Effect of notches on high temperature fatigue/creep behaviour of CMSX-4 superalloy single crystals. In: Temperature-Fatigue Interaction, L. Rémy and J. Petit (eds.), ESIS Publication 29, Elsevier, Amsterdam, 2002, pp. 55-64.

P. Lukáš, L. Kunz and M. Svoboda: Interaction of high cycle fatigue with high temperature creep in superalloy single crystals, Z.Metallkde., 93, 2002, pp. 661-665.

P. Lukáš, L. Kunz: Cyclic plastic deformation and initiation of cracks in metals, overview lecture, Fatigue 2002, Proceedings of the Eight International Fatigue Congress, Ed. A.F. Blom, Vol.2, EMAS 2002, pp. 931-946.

P. Lukáš, L. Kunz: Specific features of high-cycle and ultra-high-cycle fatigue. Fatigue Fract Engng Mater Struct, 25, 2002, 747-753.

I. M. Wilcock, P. Lukáš, M. Maldini, J. Klabbers, B. Dubiel and M. B. Henderson: The creep behaviour of as-cast SX CM186LC at industrial gas turbine operating conditions, in: Materials for Advanced Power Engineering 2002, J.Lecomte-Beckers, M.Carton, F.Schubert and P.J.Ennis (Editors), Forschungszentrum Jülich 2002, Part 1, pp. 139-148.

D. W. Bale, M. Henderson, B. Dubiel, A. Czyrska-Filemonowicz, C. Guardamagna, P. Bontempi, P. Mulvihill, P. Lukáš, K. Obrtlík and H. Kolkman: The low cycle fatigue behaviour of as cast single crystals CM186LC, in: Materials for Advanced Power Engineering 2002, J.Lecomte-Beckers, M.Carton, F.Schubert and P.J.Ennis (Editors), Forschungszentrum Jülich 2002, Part 1, pp. 149-158.

2001

Z. Knésl, L. Náhlík, Z. Keršner: Calculation of the critical stress in two-phase materials. Proceedings of the International Conference on Structural Engineering, Mechanics and Computation, Cape Town, 2001, pp. 737-744.

KUNZ L, LUKÁŠ P, OBRTLÍK K: Microstructure of CMSX-4 single crystals after creep and fatigue. Acta Metallurgica Slovaca 7 (2001) 409–413.

L. Kunz, P. Lukáš and K. Obrtlík: Microstructure of CMSX-4 single crystals after creep and fatigue, Acta Metallurgica Slovaca, Vol. 7, 2001, pp. 409-413.

L. Kunz, P. Lukáš, B. Weiss, D. Melisova: Effect of loading history on cyclic stress-strain response, Mat.Sci.Eng., Vol. A314, 2001, pp. 1-6.

L. Kunz and P.Lukáš: Cyclic stress-strain behavior of 9%Cr-1%Mo steel at positive mean stress, ICSMA-12, Mat.Sci.Eng., Vol. A319-321, 2001, pp. 555-558.

L.Náhlík, Z.Knésl, J.Vrbka: Propagation of a fatigue crack through a protective layer. In: proceedings of conference Surface Treatment 2001,ed. C.A. Brebbia, Sevilla 2001, WIT Press Southampton 2001, p. 181-190.

P. Lukáš, P. Preclík and J. Čadek: Notch effects on creep behaviour of CMSX-4 superalloy single crystals, Mat.Sci.Eng., Vol. A298, 2001, pp. 84-89.

P. Lukáš, L. Kunz: Cyclic slip localisation and fatigue crack initiation in fcc single crystals, Mat.Sci.Eng., Vol. A314, 2001, pp. 75-80.

P. Lukáš, L. Kunz: Specific features of high-cycle and ultra-high-cycle fatigue. In: Fatigue in the Very High Cycle Regime, S. Stanzl-Tschegg and H. Mayer (eds.), Institute of Meteorology and Physics, Vienna, 2001, pp. 23-33.

P. Lukáš, L. Kunz: Fatigue crack initiation in fcc single crystals. In: Materials Structure and Micromechanics of Fracture, University of Technology, Brno, 2001, 263-271 (CD-ROM).

P. Preclík, P. Lukáš and J. Čadek: The effect of notches on high temperature creep behaviour of CMSX-4 superalloy single crystals. In: Materials Structure and Micromechanics of Fracture, University of Technology, Brno, 2001, 379-386 (CD-ROM).

P. Lukáš: Fatigue Crack Initiation mechanisms. In: Buschow K H J, Cahn R W, Flemings M C, Ilschner B, Kramer E J, Mahajan S (eds.) Encyclopedia of Materials: Science and Technology, Elsevier, Amsterdam, 2001, pp. 2885-2894.

Last update
11. 11. 2009