Position: scientific
Group: High Cycle Fatigue Group
Rooms: 118
Phone numbers: +420 532 290 348
Fax: +420 541 218 657
E-mail: klusak@DELETE-THIS.CZ@DELETE-THIS.COMipm.COM.cz

Klusák, J., Profant, T., Kotoul, M.: A comparison of two direct methods of generalized stress intensity factor calculations of bi-material notches, Key Engineering Materials Vols. 385-387 (2008) pp 409-412

Náhlík, L., Knésl, Z., Klusák, J. Crack initiation kriteria for singular stress concentrators. Part III: An aplication to a crack touching a bimaterial interface. Engineering Mechanics, Vol. 15, No. 2, pp. 99-114, 2008

Seitl, S. Řoutil, L., Klusák, J., Veselý, V.: The influence of the shape of a saw-cut notch in quasi-brittle 3PB specimens on the critical applied force, Applied and Computational Mechanics 2 (1), 2008, 123-132, ISSN: 1802-680X

Klusák, J., Knésl, Z.: Determination of crack initiation direction from a bi-material notch based on the strain energy density concept, Computational Materials Science (2007), Volume 39, issue 1, pp. 214-218.

Klusák, J., Knésl, Z., Náhlík, L. Crack initiation criteria for singular stress concentrations, Part II: Stability of sharp and bi-material notches, Vol. 14, No. 6, pp. 409-422, 2007

Knésl, Z., Klusák, J., Náhlík, L. Crack initiation criteria for singular stress concentrations, Part I: A universal assessment of singular stress concentrations, Vol. 14, No. 6, pp. 399-408, 2007

Seitl, S., Klusák, J., Keršner, Z.: The influence of a notch width on a crack growth for various configurations of three-point bending specimens, Materials Engineering Vol. 14, No. 3, pp. 213-219, 2007

Klusák, J., Knésl, Z.: A Bi-material Wedge – a Model for the Prediction of Failure Initiation at Shape and Material Discontinuities. Key Engineering Materials Vols. 324-325 (2006), pp. 1305-1308.

J. Klusák, Z. Knésl: Assessment of a bi-material wedge with two stress singularities. In: Advances in Fracture and Damage Mechanics IV, eds. M.H.Aliabadi et al., EC, ltd, UK, ISBN:0-9547783-1-6, 2005, pp. 211-216.

Z. Knésl, J. Klusák, L. Náhlík: Fracture mechanics parameters of general singular stress concentrators. International scientific conference held on the occasion of the 55th anniversary of founding the Faculty of Mechanical Engineering of the VSB – Technical University of Ostrava, Session 8 – Applied Mechanics, Ostrava 2005, pp. 385-390.

J. Klusák, Z. Knésl: Determination of crack initiation direction from a bi-material notch based on the strain energy density concept. In: Conference proceedings ICCES'04, [CD-ROM] ISBN: 0-9657001-6-X, 2004.

J. Klusák, Z. Knésl: Evaluation of the threshold values for the propagation of a fatigue crack starting at a V-notch. Computer Assisted Mechanics and Engineering Science, 9 (2002), pp. 459-468.