Pozice: vedoucí
Skupina: Skupina creepu kovových materiálů
Místnosti: 219, Creep sut. I
Telefonní čísla: +420 532 290 371, +420 532 290 323
Fax: +420 541 218 657
E-mail: milicka@DELETE-THIS.CZ@DELETE-THIS.COMipm.COM.cz
         ŽIŽKOVA 22
616 62 Brno Česká republika
IČO: 68081723
DIČ: CZ68081723 |
RNDr. Karel Milička, DrSc.
Pozice: vedoucí
Skupina: Skupina creepu kovových materiálů Místnosti: 219, Creep sut. I Telefonní čísla: +420 532 290 371, +420 532 290 323 Fax: +420 541 218 657 E-mail: milicka@DELETE-THIS.CZ@DELETE-THIS.COMipm.COM.cz Projekty Vliv rozhraní matrice a zpevňující fáze na pevnost a tepelné vlastnosti kompozitů s matricí Mg-Al-Ca
Mikroprocesy plastické deformace v moderních slitinách a kompozitech na bázi lehkých kovů za zvýšených teplot
Analýza žárupevnosti svarových spojů energetických zařízení využitím techniky protlačovacích zkoušek na malých tenkých discích
Tepelně aktivovaná deformace a vnitřní napětí ve slitinách a kompozitech
Publikace: 2008 Dymáček P., Milička K.:
Small punch testing and its numerical simulations under constant deflection force conditions, Strength of materials, 1/2008, pp. 32-35, ISSN 0556-171X 2007 Dobeš, Ferdinand, Milička, Karel:
Internal Stress and Activation Energy of Creep. Materials Science and Engineering A: Structural materials. Roč. 462, č. 1-2 (2007), s. 380-383. ISSN 0921-5093. Dobeš, Ferdinand - Pérez, Pablo - Milička, Karel - Garcés, Gerardo - Adeva, Paloma: Estimation of Anisotropy of Mechanical Properties in Mg Alloys by Means of Compresive Creep Tests.
5th International Conference on Materials Structure and Micromechanics of Fracture. Abstract booklet. Brno: UTIUM, 2007 - (Šandera, P.) S. 169-169. ISBN 978-80-214-3434-9. Dobeš, Ferdinand, Kratochvíl, P., Milička, Karel:
Compressive Creep of Fe3Al-type Iron Aluminide with Zr Additions. 5th International Conference on Materials Structure and Micromechanics of Fracture. Abstract booklet. Brno: VUTIUM, 2007 - (Šandera, P.) S. 104-104. ISBN 978-80-214-3434-9. Kratochvíl, P., Dobeš, Ferdinand, Milička, Karel, Pešička, Josef:
The Change of the Mechanical Properties and of the Structure of the Alloy during Gradual Approach of its Composition from Fe-40Al to Fe-43Al-4C (at. %). Discussion Meeting on the Development of Innovative Iron Aluminium Alloys /4./. Duebendorf : EMPA - Materials Science and Technology, 2007 - (Palm, M.; Spiegel, M.; Stein, F.; Krein, R.) S. 42-42. Dobeš, Ferdinand, Milička, Karel, Kratochvíl, P., Pešička, Josef:
The Internal and Threshold Stresses in Creep of Fe-30Al-4Cr Intermetallic Alloy with Zr Addition. Discussion Meeting on the Development of Innovative Iron Aluminium Alloys /4./. Duebendorf : EMPA - Materials Science and Technology, 2007 - (Palm, M.; Spiegel, M.; Stein, F.; Krein, R.) S. 59-59. Dobeš, Ferdinand, Milička, Karel, Besterci, M.:
Small Punch Testing of Al-4 vol. % Al4C3 Composite in Creep Conditions. High Temperature Materials and Processes. Roč. 26, č. 3 (2007), s. 193-199. ISSN 0334-6455 Dymáček P., Milička K.:
Influence of parameters of the arrangement on results of the small punch test, Materials Engineering XIV, 3/2007 (2007), s. 181-185. ISSN 1335-0803 Milička, Karel - Dobeš, Ferdinand:
Constitutive description of creep behaviour of Mg-4Al-1Ca alloy. 5th International Conference on Materials Structure and Micromechanics of Fracture. Abstract booklet. Brno: VUTIUM, 2007 - (Šandera, P.) S. 46-46. ISBN 978-80-214-3434-9. 2006 Dobeš F, Kratochvíl P, Milička K.
Creep of cast Fe-36Al-2Ti alloy Intermetallics 14: 1199-1203, 2006 Zehetbauer M, Schafler E, Dobeš F, Milička K.
A critical analysis of the composite model as applied to high-temperature creep of Al and an Al-Mg alloy Zeitschrift für Metallkunde 97: 329-335, 2006 Dobeš, Ferdinand. - Perez, Pablo - Milička, Karel - Garces, Gerardo - Adeva, Paloma:
Influence of Specimen Orientation on Creep of Mg–10 Vol. % Ti PM -Composite. Proceedings of the 7th International Conference on Magnesium Alloys and Their Application. Weinheim : WILEY-VCH, 2007 - (Kainer, K.) pp. 699-703. Dobeš, Ferdinand. - Kratochvíl, Petr - Milička, Karel - Pešička, Josef:
The effect of carbon on high temperature deformation of Fe40Al based alloys. 3rd Discussion Meeting on the Development of Innovative Iron Aluminium Alloys. Duesseldorf Max Planck Institute fuer Eisenforschung, 2006. p. 36 Milička K., Dobeš F.
Small punch testing of P91 steel International Journal of Pressure Vessels and Piping 83: 625-634, 2006 Milička, Karel - Dobeš, Ferdinand:
Threshold creep behaviour of Mg-alloy matrix composites with short fibres. Proceedings of the 7th International Conference on Magnesium Alloys and Their Application. Weinheim : WILEY-VCH, 2007 - (Kainer, K.) pp. 947-952. 2005 K. Milička, F. Dobeš:
Directional creep behaviour of two magnesium alloy base composites with fibres. Kovove Mater. 43: 45-54, 2005 K. Milička, F. Dobeš:
Relation between uniaxial and equi-biaxial creep and creep fracture behaviour in P91 steel. Materials Science Forum 482: 407-417, 2005 2004 F. Dobeš, K. Milička, P. Kratochvíl:
Small punch creep in Fe28Al3Cr0.02Ce alloy Intermetallics 12: 1397-1401, 2004. F. Dobeš, K. Milička:
Comparison of thermally activated overcoming of barriers in creep of aluminum and its solid solutions Materials Science and Engineering A 387-389: 595-598, 2004. K. Milička, F. Dobeš:
The high-temperature characterisation of welded joints using small-punch testing. Material & Technology 38: 9-12, 2004 K. Milička, F. Dobeš:
Creep behaviour of a magnesium alloy AS21 and its fibre-strengthened composite. J. Alloys and Compd. 378: 167-171, 2004 J. Čadek, K. Kuchařová, K. Milička:
Journals of Alloys and Compouds, 378 (2004) 123-126 J. Čadek, K. Kuchařová, K. Milička:
Creep in copper dispersion strengthened with fine alumina particles and reinforced with alumina short fibres - an ODS copper matrix composite. J. Alloys and Compd. 378: 123-126, 2004 J. Buršík, V. Buršíková, V. Navrátil and K. Milička. Effect of the creep deformation on the microstructure and indentation response of leaded brass. Acta Metallurgica Slovaca 10 (2004) 829-831.
2003 K. Milička, F. Dobeš:
Application of small punch tests in analysis of mechanical behaviour of composites with magnesium alloy matrix. Proceedings of the International Conference ADVANCED METALLIC MATERIALS. Smolenice, Slovakia, 5. - 7. 11. 2003. Ed. Jerz, J.; Šebo, P.; Zemánková, M. Bratislava, Institute of Materials and Machine Mechanics 2003, p. 202. K. Milička, F. Dobeš, E. Schafler, M. Zehetbauer:
Comparison of X-ray line profile and dip tests measurements of internal stresses during high temperature creep of copper. Kovove Mater. 41: 133-144, 2003 2002 F. Dobeš, K. Milička:
On the Monkman-Grant relation for small punch test data Materials Science and Engineering A336: 245-248, 2002. F. Dobeš, K. Milička:
Analysis of creep in long range ordered CuZn in terms of thermally activated overcoming of barriers Materials Science and Engineering A324: 73-76, 2002. 2001 F. Dobeš, K. Milička:
Small Punch Testing in Creep Conditions Journal of Testing and Evaluation 29: 31 - 35, 2001. K. Milička, Z. Trojanová, F. Dobeš, P. Lukáč
Application of small punch tests in the determination of mechanical properties of magnesium alloys and composites. Euromat 2001, Rimini, paper 247. K. Milička, F. Dobeš:
Comparison of small punch tests performed on exposed power plant part. Baltica V, Condition and Life Management for Power Plants. S. Hietanen and P. Auerkari (eds.), Vol. I, p. 383-393. Technical Research Centre of Finland, Espoo, 2001 |
|
Poslední změna
11. 11. 2009 |