Vybrané publikace pracovní skupiny vývoj a recyklace polymerních směsí

Kelnar I., Stephan M., Jakisch L., Fortelný I.
Influence of the component reactivity on the properties of ternary reactive blends Nylon 6/rigid brittle polymer/elastomer
J. Appl. Polym. Sci. 78, 1597–1603 (2000)

Kelnar I., Stephan M., Jakisch L., Janata M., Fortelný I.
Compatibilization of PA6/PPO blend with carboxylated poly(styrene) compounds
J. Appl. Polym. Sci. 80, 2273–2280 (2001)

Kruliš Z., Kokta B. V., Horák Z., Michálková D., Fortelný I.
Compatibilization as a procedure for recycling of commingled polyolefin waste
Macromol. Mater. Eng.  286, 156–160 (2001)

Z. Horák, D. Hlavatá, I. Fortelný, F. Lednický
Effect of Styrene-Butadiene Triblock Copolymer Structure on its Compatibilization Efficiency in PS/PB and PS/PP Blends
Polym. Eng. Sci., 42 (10), 2042 (2002)

Z. Horák, D. Hlavatá, J. Hromádková, J. Kotek, V. Hašová, J. Mikešová and A. Pleska
Effect of the selected structural parameters of S-B copolymers on their compatibilization eficiency in PS/PB blends
J.Polym.Sci, Polym.Phys. 40, 2612 (2002)

Kelnar I., Kotek J., Munteanu B. S., Fortelný I.
Influence of properties and morphology of elastomeric phase on the behavior of ternary reactive blends of polyamide 6/rigid polymer/elastomer
J. Appl. Polym. Sci. 89, 3647-3651 (2003)

Fortelný I., Michálková D., Kruliš Z.:
An efficient metod of material recycling of municipal plastic waste
Polym.Degrad.Stab. 85 975-979 (2004)

Pospíšil J., Michálková D., Fortelný I., Kruliš Z., Šlouf M.:
Aromatic diamines as cooperativ compatibilizers and impact modifiers in LDPE/HIPS blends
Polymers and Polymer Composites, 13 [3] 313-320 (2005)

Pospíšil J., Fortelný I., Michálková D., Kruliš Z., Šlouf M.:
Mechanism of reactive compatibilisation of a blend of recycled LDPE/HIPS using an EPDM/SB/aromatic diamine co-additive system
Polym.Degrad.Stab. 90 244-249 (2005)

Kolařík J., Kruliš Z., Šlouf M.:
High-density polyethylene/cycloolefin copolymer blends: part 1- phase structure, dynamic mechanical, tensile and impact properties.
Polym. Eng. Sci., 45 817-826 (2005)