INTERNATIONAL UNION OF PURE AND APPLIED CHEMISTRY
CZECH CHEMICAL SOCIETY
42nd Microsymposium of P.M.M.
PRAGUE, 14 - 17 JULY 2003
INSTITUTE OF MACROMOLECULAR CHEMISTRY
ACADEMY OF SCIENCES OF THE CZECH REPUBLIC
PRAGUE, CZECH REPUBLIC
42nd Microsymposium of P.M.M. Programme Booklet published as
ISBN 80-85009-47-1
by the Institute of Macromolecular Chemistry
of the Academy of Sciences of the Czech Republic
Summaries, except for their headings, are printed without editing.
under the auspices of the
INTERNATIONAL UNION OF PURE AND APPLIED CHEMISTRY
Macromolecular Division
R.F.T. Stepto
President of the Macromolecular Division
P. Hrdlovič
Representative of the IUPAC
Organized by the
K. Ulbrich
Director of the Institute
D. Výprachtický
P.M.M. Head
J. Kahovec
P.M.M. Editor
J. Jůza
P.M.M. Assistant Editor
M. Srpová
P.M.M. Secretary
E. Grisová
M. Rodová
P.M.M. Assistant Secretaries
J. Brus
P.M.M. Technical Manager
D. Kotíková
P.M.M. Social Programme Manager
Address:
| Institute of Macromolecular
Chemistry Academy of Sciences of the Czech Republic P.M.M. Secretariat Heyrovského nám. 2 CZ-162 06 Praha 6, Czech Republic |
|
| Phone: | +420-296 809 332 |
| Fax: | +420-296 809 410 |
| E-mail: | sympo@imc.cas.cz |
| WWW: | http://www.imc.cas.cz/sympo/42micros.html |
N.C. Billingham (U.K.), A. Buekens (Belgium), I. Fortelný (Czech Republic) P. Hrdlovič (Slovak Republic)
Jana Kovářová (Czech Republic)
The meeting has been generously sponsored by
On-site registration of participants takes place on Sunday, 13 July, from 14:00 to 18:30 in the Institute of Macromolecular Chemistry, Praha 6, Heyrovského nám. 2; and continues the next day from 8:30. The Microsymposium Office will operate on 14–17 July (Monday through Thursday) from 08:30 to 12:30 and (except Wednesday) from 13:30 to 16:30.
All participants must register. Only persons wearing name badges are entitled to enter the lecture room in the Institute.
No exchange counter operates in the Institute of Macromolecular Chemistry. Information about the nearest exchange office is available at the Registration Desk and on the website.
On-site cash payment of the registration fee is considered as payment after 30 April. The P.M.M. Secretariat is able to accept EC/MC, EDC/Maestro and VISA cards at the Registration Desk.
The registration fee does not include provisions for any kind of insurance. Neither the organizing institution nor their representatives assume responsibility or liability for personal accident and loss of or damage to belongings however caused.
Accommodation for most participants has been reserved in the Hvězda student dormitory, Praha 6, Zvoníčkova 5. Payment of the booked accommodation is to be made at the Registration Desk. Accommodation includes breakfast. Breakfast will be served in the "Větrník" refectory from 07:00 to 08:30.
The main lecturers are accommodated in the guest rooms of the Czech Technical University, Prague 6, Thákurova 1 (Masaryk hall of residence). Accommodation includes breakfast. Breakfast will be served in the restaurant on the first floor from 07:00 to 08:30.
Participants are kindly requested to leave the rooms on the day of their departure by 10:00.
In Prague, an integrated transport system (underground Metro, trams, and buses) operates without conductors. Tickets must be purchased in advance (exceptions are given below) and stamped inside tram or bus, or before passing the gates of the Metro.
Most Metro stations are equipped with ticket machines. In buses, the most common 60-min tickets can be bought at the driver, but with additional charge of 3 Kč and for the exact change only. Tickets for 8 Kč for a single 15-min journey by tram or bus, or four-stop journey by Metro as well as transfer tickets for 12 Kč for a 60-min journey (90 min at night and on weekends) by all means of transport are on sale at the airport, at railway stations, newspaper stands and tobacco shops, at hotel reception desks, etc. The Metro runs from 05:00 till midnight.
From the Hvězda student dormitory, take any of buses No. 179, 184 or 191 (direction of Petřiny or Letiště Ruzyně) to the ”Petřiny” stop (3 stops). You can also walk through Zeyerova Alej St. along the high-voltage line to the Institute (600 m).
From the Masaryk hall of residence of the Czech Technical University (Thákurova 1, Praha 6), take tram No. 2 (direction of Petřiny) as far as the terminus "Petřiny" (11 stops, 16 min).
For more detailed and topical description, see the WWW page (http://www.imc.cas.cz/sympo/ginfo/). The map of Prague is available at http://mapy.atlas.cz.
The Hvězda student dormitory is located at the crossing of Ankarská, Zvoníčkova, Brunclíkova and Zeyerova Alej streets. The nearest bus stop is "Nad Markétou", which is located 50 m from the dormitory (150 m from its reception). The nearest tram stops are "Vypich" (500 m), "Větrník" (700 m), "Obchodní dům Petřiny" (500 m).
From the Institute, you can either walk through Zeyerova Alej St. along the high-voltage line to the student dormitory (600 m), or take any of buses No. 179, 184, 191 (direction of Nové Butovice or Na Knížecí) to the "Nad Markétou" stop (2 stops). The student dormitory is opposite to the stop.
From the Institute, take tram No. 2 in direction of Červený vrch to ”Thákurova” stop (11 stops, 15 min).
From the city centre, take the Metro green line A to ”Dejvická” station, leave it through the direction of Evropská (that with escalators), exit Šolínova and walk 300 m westwards through Evropská or Zikova St. as far as Thákurova St. You can also take any tram in direction of Červený Vrch - Divoká Šárka for 1 stop to "Thákurova" stop.
From the Institute, take tram No. 18 in direction of Vozovna Pankrác as far as Malostranská (11 stops) and change for tram 12 in direction of Hlubočepy (the same direction). Get off at the second stop (Hellichova), walk forward as far as the next corner, and turn to the right and go straight on (ca 50 m).
Taxis can be hired at the airport or the railway stations. The fare is max. 22 Kč per kilometre and 30 Kč is the boarding fee within the city boundaries (2003 prices).
We recommend checking the fare before entering a taxi.
A special bus will bring the participants from the Masaryk hall of residence of the Czech Technical University to the Institute in the morning only; the departure times are given on the notice board at the Registration Desk.
Prague has direct air links with most capitals in Europe and with many overseas countries. The international airport Praha is situated about 20 km from the city centre (9 km from the Institute). To reach the airport, we recommend bus No. 179 from the Institute and Hvězda student dormitory, bus No. 119 for connection from the "Dejvická" Metro station (line A) or bus No. 100 from "Zličín" metro station (line B). Bus fare: 12 Kč (see Public transport above).
Buses operated by the CEDAZ Co. run to the airport from the city terminal near the Metro station "Náměstí Republiky" (line B) in 30-min intervals. Bus fare: 90 Kč.
International trains arrive at and leave from the following stations: Praha, hlavní nádraží (Main Station; Metro line C), Praha – Holešovice (Metro line C, "Nádraží Holešovice"), and Praha – Smíchov (Metro line B, "Smíchovské nádraží").
Coffee, tea, and soft drinks will be available during breaks of the programme sessions and poster sessions.
Lunch will be served from Monday through Thursday (12:30-13:30) to active participants and registered accompanying persons (except Tuesday for the latter) in the refectory of the ”Větrník” student dormitory in walking distance from the Institute. Admission by tickets (L1 – L4) only.
Refreshments and lunches are included in the registration fee. (menu is available in a separate document)
Photos from the conference are available here
Sunday, 13 July, 19:00-21:00. All registered participants are cordially invited to take part in a complimentary get-together party with cold buffet in the refectory of the "Větrník" student dormitory.
Wednesday, 16 July, 14:00-23:00. A visit to the magnificent castle Konopiště, 50 km south of Prague, founded in the 13th century and famous as the residence of the Austro-Hungarian successor to the throne Franz Ferdinand d`Este, assassinated in Sarajevo in 1914. The castle is surrounded by a large park.
The excursion continues in Průhonice garden at the edge of Prague. The unique botanical park includes rich collection of plants from all over the world.
The informal dinner will be served in the Park Hotel restaurant after sightseeing.
The bus departs from the Institute at 14:00 and returns to the accommodation of the main lecturers (Czech Technical University, Prague 6, Thákurova 1) and the Hvězda student dormitory.
Admission by tickets (”Excursion”) only. Price: 70 €.
Thursday, 17 July: After the last lecture, all participants are invited to a farewell drink in the entrance hall of the Institute.
Admission only to the registered persons (including children) who paid the registration fee. The fee includes four lunches, three of which (Monday, Wednesday, and Thursday) are served in the ”Větrník” refectory from 12:30 to 13:30 (see p. 10). Please present your tickets when entering the bus (”Accompanying Persons Programme”) or the refectory (AP L1 – AP L4).
14:00-17:00 – Introductory sightseeing in Prague.
The bus departs from the Institute and returns to the Masaryk hall of residence, and the Hvězda student dormitory.
09:00-17:00 – Visit to Nižbor glassworks producing hand-cut lead crystal glass. Visit to the medieval castle Křivoklát, 50 km west of Prague that used to be a seat of princes and kings of Bohemia from the Přemyslid dynasty (until 1306) and of kings of the Luxemburg (1310–1437) and Jagiello (1471-1526) dynasties. Lunch in a restaurant in the vicinity of the castle.
The bus departs from the Institute and returns to the Hvězda student dormitory and the Masaryk hall of residence.
09:00-12:30 – Guided visit to the Prague Castle (Hradčany).
The bus departs from the Institute. After a walk through the Castle area and to Lesser-Town Square (Malostranské náměstí), the bus returns to the ”Větrník” refectory.
09:00-12:30 – Guided tour including a walk over the Gothic Charles Bridge (Karlův most), often called a gallery of statues in the open air, and through the Old Town of Prague.
The bus departs from the Institute, and returns to the ”Větrník” refectory.
All sessions will be held in the Institute of Macromolecular Chemistry of the Academy of Sciences of the Czech Republic, Praha 6, Heyrovského náměstí 2.
English is the working language of the Microsymposium. No translation will be provided.
The presentation time for each lecture is 40 min, additional 10 min is reserved for discussion.
The presentation time for each lecture is 20 min, additional 5 min is reserved for discussion.
Poster sessions will take place on Tuesday and Wednesday in the morning. Posters should be mounted a day before and removed immediately after the poster session.
Videoprojector (XGA) with connection to a notebook, to local PC (ZIP 100 MB, CD, FDD 3.5”) or to VHS, overhead projector, projector of 5 x 5 cm slides (the slide projector does not function with slides thicker than 2.5 mm), and blackboard are available for lectures and discussions.
Boards for mounting poster materials are 120 cm high and 150 cm wide. Pushpins and felt-tip pens are available in the poster area.
| ML 01 | N.C. Billingham, P.K.
Fearon, M.N. Grigg, S.W. Bigger (U.K., Australia) Chemiluminescence combined with thermal analysis for studying polymer oxidation |
| ML 02 | J.-L. Gardette, A.
Rivaton (France) Radiation ageing of polymer materials |
| ML 03 | I. Tincul (South Africa) Overview and particularities in degradation of polyolefins derived from Fischer-Tropsch synthesis |
| ML 04 | N. Mayne (Belgium) Essential criteria for the successful recovery of plastics |
| ML 05 | F.P. La Mantia, R.
Scaffaro (Italy) Optimisation of processing conditions in the recycling of polycondensation polymers |
| ML 06 | A. Okuwaki (Japan) Feedstock recycling of plastics in Japan |
| ML 07 | H. Bockhorn (Germany) Thermal degradation of polymers: basic priciples and unsolved problems |
| ML 08 | M. Edge, N.S.
Allen (U.K.) Nanocomposites: Stability issues and characterization |
| SL 01 | M. Hamskog, P.
Gijsman, B. Terselius (Sweden, Netherlands) Characterization of aged and processed polypropylene by imaging chemiluminescence |
|---|---|
| SL 02 | Y. Kann, N.C.
Billingham (USA, U.K.) Chemiluminescence is shedding light on degradation and stabilization of plasticized poly(vinyl chloride) |
| SL 03 | J. Rychlý, L.
Matisová-Rychlá, I. Lacík, K. Slovák (Slovak
Republic) Thermal oxidation of cellulose investigated by chemiluminescence: Extrapolation of stability data to conditions close to ambient |
| SL 04 | C. Kiss, E. Epacher, P.
Staniek, B. Pukánszky (Hungary, France) The role of weak sites in the long-term aging od HDPE under the effect of extractive media |
| SL 05 | N.S. Allen, M. Edge,
D. Mourelatou, A.N. Wilkinson, C.M. Liauw, M.D.
Parellada, J.A. Barrio, V. Ruiz Santa Quiteria (U.K.,
Spain) Thermal degradation and ozone attack on styrene-ethylene-butene-styrene (SEBS) copolymer |
| SL 06 | M.P. Foulc, A. Bergeret,
L. Ferry, P. Ienny, A. Crespy (France) Hydrothermal stability of glass fiber reinforced poly(ethylene terephthalate) composites: A multiscale approach |
| SL 07 | B. Abu-Sharkh (Saudi
Arabia) Artificial and natural weathering of PP-palm fiber composites: Mechanical and spectroscopic characterization |
| SL 08 | J.F. Feller, A.
Bourmaud, Y. Grohens (France) Bisphenol A poly(carbonate) recycling: Rheological and calorimetric study |
| SL 09 | M. Aglietto, M.-B.
Coltelli, S. Savi (Italy) Post-consumer recycling of polyolefins and condensation polymers by reactive blending |
| SL 10 | C. Kröhnke, P.
Staniek, J. Malík (France) New development in processing stabilization of polyolefins |
| SL 11 | X. Colin, R. Assadi,
J. Verdu (France) Oxidative crosslinking during polymer processing. Application to poly(ethylene terephthalate) recycling |
| SL 12 | I. Fortelný, D.
Michálková, Z. Kruliš (Czech Republic ) Efficient method of material recycling of municipal plastic waste |
| SL 13 | T. Watanabe, S. Sato,
Y. Ohashi, Y. Honda, K. Muraoka, T. Kimura (Japan) Degradation of vulcanized rubbers and polyurethanes by biomimetic free radical reactions catalyzed by oxidative enzymes |
| SL 14 | S. Fellahi, Z.
Saffidine (Algeria) Contribution to chemical recycling of PET bottles |
| SL 15 | C.H. Chan, J. Ismail,
H.W. Kammer (Malaysia, Germany) Melt reaction in polymer blends comprising PHBV and ENR |
| SL 16 | M.C. Grob (Switzerland) Enhancing lifetime of glazing applications by tailor-made, improved stabilizer packages |
| SL 17 | H. Ohtani, Y.
Taguchi, Y. Ishida, S. Tsuge, H. Matsubara (Japan)
Photostabilizing action of a polymeric HALS in polypropylene studied by reactive thermal desorption-GC and MALDI-MS |
| SL 18 | L.Yu. Smoliak, N.R.
Prokopchuk, Yu.P. Losev (Belarus) Oligomeric disulfides as stabilizers for polyolefins with intramolecular synergetic effects |
| SL 19 | J. Pospíšil, J.
Pilař, A. Marek, Z. Horák, S. Nešpůrek (Czech
Republic) Effect of environment and microenvironment on activity of polymer stabilizers |
| SL 20 | L. Costa, P. Bracco,
E.M. Brach del Prever, M.P. Luda (Italy) Stabilization of orthopaedic UHMWPE with vitamin E |
| SL 21 | M. Danko, Š.Chmela, P.
Hrdlovič (Slovak Republic) Photochemical stability and photostabilizing efficiency of anthracene/hindered amine stabilizers probes in polymer matrices |
| Sunday | 14:00 – 18:30 | Registration | |
| 13 JULY | 19:00 – 21:00 | Welcome reception | |
| Monday | |||
| 14 JULY | 09:00 – 09:25 | Opening ceremony | |
| Lecture session 1 | |||
| 09:25 – 10:15 | N.C. Billingham | ML 1 | |
| 10:15 – 10:35 | Coffee break | ||
| 10:35 – 11:00 | M. Hamskog | SL 1 | |
| 11:00 – 11:25 | Y. Kann | SL 2 | |
| 11:25 – 11:50 | J. Rychlý | SL 3 | |
| 11:50 – 12:15 | B. Pukánszky | SL 4 | |
| 12:30 – 13:30 | Lunch | ||
| Lecture session 2 | |||
| 14:00 – 14:50 | J.-L. Gardette | ML 2 | |
| 14:50 – 15:15 | M. Edge | SL 5 | |
| 15:15 – 15:40 | A. Bergeret | SL 6 | |
| 15:40 – 16:05 | Coffee break | ||
| Lecture session 3 | |||
| 16:05 – 16:55 | I. Tincul | ML 3 | |
| 16:55 – 17:20 | B. Abu Sharkh | SL 7 | |
| 20:00 | Concert | ||
| TUESDAY | |||
| 15 JULY | Lecture session 4 | ||
| 09:00 – 09:50 | N. Mayne | ML 4 | |
| 09:50 – 10:15 | J.F. Feller | SL 8 | |
| 10:15 – 10:35 | Coffee break | ||
| 10:35 – 11:00 | M.B. Coltelli | SL 09 | |
| Poster session 1 | |||
| 11:00 – 12:20 | Posters P 01 - P 31 | ||
| 12:30 – 13:30 | Lunch | ||
| Lecture session 5 | |||
| 14:00 – 14:50 | F.P. La Mantia | ML 5 | |
| 14:50 – 15:15 | C. Kröhnke | SL 10 | |
| 15:15 – 15:40 | X. Colin | SL 11 | |
| 15:40 – 16:05 | Coffee break | ||
| Lecture session 6 | |||
| 16:05 – 16:30 | I. Fortelný | SL 12 | |
| 16:30 – 16:55 | T. Watanabe | SL 13 | |
| 16:55 – 17:20 | S. Fellahi | SL 14 | |
| Wednesday | |||
| 16 JULY | Lecture session 7 | ||
| 09:00 – 09:50 | A. Okuwaki | ML 6 | |
| 09:50 – 10:15 | C.H. Chan | SL 15 | |
| 10:35 – 10:35 | Coffee break | ||
| 10:35 – 11:00 | M.C. Grob | SL 16 | |
| Poster session 2 | |||
| 11:00 – 12:20 | Posters P 32 – P 55 | ||
| 12:30 – 13:30 | Lunch | ||
| 14:00 – 23:00 | Excursion with Informal Dinner | ||
| Thursday | |||
| 17 JULY | Lecture session 8 | ||
| 09:00 – 09:50 | H. Bockhorn | ML 7 | |
| 09:50 – 10:15 | H. Ohtani | SL 17 | |
| 10:15 – 10:35 | Coffee break | ||
| Lecture session 9 | |||
| 10:35 – 11:00 | L.Yu. Smoliak | SL 18 | |
| 11:00 – 11:25 | J. Pospíšil | SL 19 | |
| 11:25 – 11:50 | L. Costa | SL 20 | |
| 11:50 – 12:15 | P. Hrdlovič | SL 21 | |
| Lunch | |||
| Lecture session 10 | |||
| 14:00 – 14:50 | N.S. Allen | ML 8 | |
| 14:50 | Closing remarks | ||
| Farewell drink | |||
| 9:00 | OPENING K.
Ulbrich P. Hrdlovič J. Kovářová |
||
| 9:25 | Opening main
lecture ML 1 N.C. Billingham, P.K.
Fearon, M.N. Grigg, S.W. Bigger (U.K., Australia) |
||
| 10:15 - 10:35 Coffee break | |||
| Lecture session 1 | Chairpersons: | N.S. Allen (U.K.) I. Fortelný (Czech Republic) |
|
| 10:35 | Special
lecture SL 1 M. Hamskog, P. Gijsman,
B. Terselius (Sweden, Netherlands) |
||
| 11:00 | Special
lecture SL 2 Y. Kann, N.C. Billingham (USA,
U.K.) |
||
| 11:25 | Special
lecture SL 3 J. Rychlý, L.
Matisová-Rychlá, I. Lacík, K. Slovák (Slovak
Republic) |
||
| 11:50 | Special
lecture SL 4 C. Kiss, E. Epacher, P. Staniek, B.
Pukánszky (Hungary, France) |
||
| 12:30 – 13:30 Lunch | |||
| Lecture session 2 | Chairpersons: | N. C. Billingham (U.K.) L. Costa (Italy) |
|
| 14:00 | Main lecture
ML 2 J.-L. Gardette, A. Rivaton (France) |
||
| 14:50 | Special
lecture SL 5 N.S. Allen, M. Edge, D.
Mourelatou, A.N. Wilkinson, C.M. Liauw, M.D. Parellada,
J.A. Barrio, V. Ruiz Santa Quiteria (U.K., Spain) |
||
| 15:15 | Special
lecture SL 6 M.P. Foulc, A. Bergeret, L.
Ferry, P. Ienny, A. Crespy (France) |
||
| 15:40 – 16:05 Coffee break | |||
| Lecture session 3 | Chairpersons: | T. Watanabe (Japan) B. Pukánszky (Hungary) |
|
| 16:05 | Main lecture
ML 3 I. Tincul (South Africa) |
||
| 16:55 | Special
lecture SL 7 B. Abu- Sharkh (Saudi Arabia) |
||
| LECTURE SESSION 4 | Chairpersons: | J.-L. Gardette (France) L. Rychlá (Slovak Republic) |
||
| 09:00 | Main lecture
ML 4 N. Mayne (Belgium) |
|||
| 09:50 | Special
lecture SL 8 J.F. Feller, A. Bourmaud, Y.
Grohens (France) |
|||
| 10:15 - 10:35 Coffee break | ||||
| 10:35 | Special
lecture SL 9 M. Aglietto, M.-B. Coltelli, S.
Savi (Italy) |
|||
| 11:00-12:20 Poster session 1 | ||||
| P 01 | N.S. Allen, M.
Edge, A.N. Wilkinson, C.M. Liauw, D. Mourelatou,
E. Fontan Degradation and stabilisation of styrene-ethylene-butadiene-styrene (SEBS) block copolymer |
|||
| P 02 | A. Barcelona,
N.S. Allen, M. Edge, A.N. Wilkinson, V. Ruiz, C. Galan,
I. Campo Degradation of styrene-butadiene (SBS) block copolymer with high styrene content |
|||
| P 03 | A. Sionkowska Photodegradation of collagen materials |
|||
| P 04 | A. Sionkowska,
H. Kaczmarek, J. Skopińska, M. Wisniewski Photochemical stability of collagen/poly(ethylene glycol) blends |
|||
| P 05 | S. Morlat, J.-L.
Gardette Degradation of water-soluble polymers: Photoageing of poly(ethylene oxide) |
|||
| P 06 | T. Divers, Y.
Grohens, J.F. Feller Synthesis and characterization of nanostructured starch formiates |
|||
| P 07 | D. Chromcová,
A. Bernášková, R. Laga, J. Brožek, J. Roda, V. Šašek,
J. Náhlík Poly(ester-amide)s-preparation and properties |
|||
| P 08 | T. Kimura, T.
Watanabe New enzymatic reactions for the degradation of polyurethanes |
|||
| P 09 | S. Sato, Y.
Honda, K. Muraoka, T. Watanabe Devulcanization of polyisoprene rubbers by wood rot fungi |
|||
| P 10 | I. Prokopová,
V. Šašek, J. Náhlík, E. Vlčková, L. Plchotová, J.
Skolil Aromatic-aliphatic copolyesters based on reclaim poly(ethylene terephthalate) and their biological degradability |
|||
| P 11 | M. Julinová, J.
Hoffmann, V. Sedlařík, D. Bakoš Study of biodegradability of polymers with automatic analyser |
|||
| P 12 | D. Kubies, T.
Zaporozhets, R. Puffr, J. Kotek, J. Baldrian, J. Kovářová,
F. Rypáček Biodegradable polyester nanocomposites: Preparation and mechnical properties |
|||
| P 13 | J.F.
Pilichowski, T. Liptaj, M. Morel, M. Baba Crosslinking of polybutadiene. Correlation between solid-state 1H NMR, thermoporosimetry, densimetry and crystallinity measurements |
|||
| P 14 | P. Šimon, Z.
Cibulková, M. Fratričová Study of induction periods of polymer oxidation by an integral isoconversional method |
|||
| P 15 | L. Audouin, B.
Fayolle, J. Verdu Radiation-induced embrittlement of PTFE |
|||
| P 16 | B. Fayolle, L.
Audouin, J. Verdu A critical molar mass M´c governing the ductile-brittle transition of semicrystalline polymers |
|||
| P 17 | T. Karayildirim,
J. Yanik, M. Yuksel, M. Saglam, H. Bockhorn Degradation kinetics of PVC mixed with additives |
|||
| P 18 | H. Kaczmarek, J.
Kowalonek, A. Sionkowska Thermal degradation of UV-irradiated poly(vinyl chloride) containing metal salts |
|||
| P 19 | R. Benavides,
A.O. Castañeda-Facio, M.E. Martínez-Pardo, M.
Sánchez-Adame Low-temperature degradation of plasticized PVC formulations crosslinked with γ radiation |
|||
| P 20 | A. Iannoni, L.
Torre, A. Jiménez, J.M. Kenny Thermal degradation of epoxy-resin PVC plastisol blends |
|||
| P 21 | A. Jiménez,
A.J.F.N. Sobral, A.J. Valente, V.M.M. Lobo Thermal degradation of crown-ether and calix[4]pyrrole-containing polyacrylamide-based hydrogels |
|||
| P 22 | R. Puffr, J. Brožek,
J. Špátová, J. Baldrian Polyamide - montmorillonite nanocomposites |
|||
| P 23 | V. Hnát, V. Plaček,
B. Bartoníček Electrical cables in Czech nuclear power plants - simulation of their degradation |
|||
| P 24 | E. Tobolková,
J. Prokeš, I. Křivka, M. Trchová, J. Stejskal Ageing of polyaniline films related to temperature and humidity |
|||
| P 25 | O. Starykov, J.
Prokeš, I. Křivka, J. Stejskal AC conductivity and charge transport in aged polyaniline |
|||
| P 26 | M. Omastová, J.
Stejskal, J. Prokeš, M. Trchová, J. Kovářová Thermal stability of polyaniline and polypyrrole prepared in the presence of surfactants |
|||
| P 27 | F. Cataldo, M.
Omastová, J. Pionteck Ozone degradation of polypyrrole |
|||
| P 28 | I. Šeděnková,
E. Tobolková, M. Trchová, J. Stejskal Degradation of conducting polymer films |
|||
| P 29 | E.M. Hoang, C.M.
Liauw, N.S. Allen, E. Fontan, G. Marino Effect of metal stearate antacid composition on the melt stabilisation performance of hindered phenolic/phosphite combinations in LLDPE |
|||
| P 30 | E. Maloschik, E.
Földes, A. Janecska, G. Nagy, B. Pukánszky Comparison of the efficiency of phoshoric stabilizers in metallocene polyethylene |
|||
| P 31 | E. Epacher, A.
Orbán-Mester, G. Nagy, P. Staniek, B. Pukánszky Effect of component interaction on the performance of industrial additive packages used for the stabilisation of pipes |
|||
| LECTURE SESSION 5 | Chairpersons: | H. Bockhorn (Germany) H. Ohtani (Japan) |
||
| 14:00 | Main lecture
ML 5 F.P. La Mantia, R. Scaffaro (Italy) |
|||
| 14:50 | Special
lecture SL 10 C. Kröhnke, P. Staniek, J.
Malík (France) |
|||
| 15:15 | Special
lecture SL 11 X. Colin, R. Assadi, J. Verdu
(France) |
|||
| 15:40-16:05 Coffee break | ||||
| LECTURE SESSION 6 | Chairpersons: | C. Kröhnke (France) J. Pilař (Czech Republic) |
||
| 16:05 | Special
lecture SL 12 I. Fortelný, D.
Michálková, Z. Kruliš (Czech Republic ) |
|||
| 16:30 | Special
lecture SL 13 T. Watanabe, S. Sato, Y. Ohashi, Y.
Honda, K. Muraoka, T. Kimura (Japan) |
|||
| 16:55 | Special
lecture SL 14 S. Fellahi, Z. Saffidine (Algeria) |
|||
| LECTURE SESSION 7 | Chairpersons: | F.P. La Mantia (Italy) L. Audouin (France) |
|
| 09:00 | Main lecture
ML 6 A. Okuwaki (Japan) |
||
| 09:50 | Special
lecture SL 15 C.H. Chan, J. Ismail, H.W.
Kammer (Malaysia, Germany) |
||
| 10:15-10:35 Coffee break | |||
| 10:35 | Special
lecture SL 16 M.C. Grob (Switzerland) |
||
| 11:00-12:20 Poster session 2 | |||
| P 32 | Z. Starý, Z.
Kruliš, M. Šlouf, J. Hromádková The effect of processsing conditions on mechanical behavior and morphology of compatibilized PP/PS blends |
||
| P 33 | K. Antoš, J.
Sedlář Photo-initiated interaction of brominated flame retardants with HALS – A model study |
||
| P 34 | Cs. Kósa, J.
Mosnáček, Š. Chmela, I. Lukáč, W.D. Habicher, P.
Hrdlovič Photooxidation of benzil groups in the presence of HAS in polymer matrices |
||
| P 35 | Cs. Kósa, Š.
Chmela, G. Theumer, W.D. Habicher Combined hindered phenol/HAS stabilizers on the basis of diisocyanates |
||
| P 36 | L.Yu. Smoliak,
N.R. Prokopchuk Influence of molecular structure on chemical and physical factors that determine the stabilizing efficiency of hindered amines |
||
| P 37 | A. Marek, L.
Kaprálková, I. Kelnar, J. Pospíšil, J. Pilař Electron spin resonance imaging study of degradation process in polypropylene and polystyrene stabilized with hindered amine stabilizer |
||
| P 38 | O. Meszároš,
P. Schmidt, J. Pospíšil, S. Nešpůrek Atmospheric aging of poly[methyl(phenyl)silylene] containing UV absorbers and photoantioxidants |
||
| P 39 | D. Perrin, L.
Clerc, E. Leroy, A. Bergeret, J.M. Lopez Cuesta Mechanical recycling of unsaturated polyester-based composites |
||
| P 40 | A. Kuta, I.
Kroutilová, V. Ducháček Mechanically reclaimed rubber |
||
| P 41 | S. Cibelli, S.
Montesano, L. Di Maio, L. Incarnato PET recycling by reactive and foaming extrusion processes |
||
| P 42 | P.M. Stefani, D.
García, J. López, A. Jiménez Thermal degradation of rice husk-scrap tyre blends |
||
| P 43 | N.R. Prokopchuk,
O.Ya. Tolkach, L.Yu. Smoliak Rapid method for estimation of life-time recycled polymers |
||
| P 44 | N. Miskolczi, L.
Bartha, G. Deák, A. Geiger, S. Bíró, B. Jóver Thermal recycling of waste polyolefins |
||
| P 45 | R.A. Ruseckaite,
A. Fraga, A. Jiménez Pyrolysis GC-MS studies on the thermal degradation of biodegradable polymeric materials and biocomposites |
||
| P 46 | A. Geiger, S.
Bíró, L. Bartha, G. Deák, E. Fantó, N. Miskolczi Study of stability of rubber bitumens |
||
| P 47 | S. Bíró, A.
Geiger, R. Perlaki, L. Bartha, G. Deák, E. Fantó, N.
Miskolczi Rheological study of rubber containing bituminous compositions |
||
| P 48 | J. Vraštil, P.
Rybyšar, M. Večeřa, L. Prokůpek Corrosion resistance of both filled and reinforced vulcanizates based on Krasol LBD |
||
| P 49 | J. Jůza Polymer surface tension at stability limit |
||
| P 50 | J. Hradil, J.
Kovářová Low-crosslinked alkyl methacrylates - superabsorbents for nonpolar liquids |
||
| P 51 | S. Luzuriaga, J.
Kovářová, I. Fortelný Reprocessing of aged polymers: Effect of ageing conditions on the resulting properties |
||
| P 52 | P.K. Fearon,
S.W. Bigger, N.C. Billingham Chemiluminscence during polymer oxidation |
||
| P 53 | P.K. Fearon, L.
Matisová-Rychlá, J. Rychlý, S.W. Bigger, N.C.
Billingham Comments on the reproducibility of chemiluminescence testing |
||
| P 54 | Yu-Zhong Wang,
Ke-Ke Yang, Xiu-Li Wang Biodegradable aliphatic polyesters |
||
| P 55 | Qian Zhou, Yao
Zheng, Yu-Zhong Wang Catalytic degradation of mixed polyolefin plastics into pyrolytic oil via composite catalysts |
||
| P 56 | J.
Rybníček, J. Steidl, Z. Kořínek Recycling of polycarbonate car headlight lenses |
||
| P 57 | Y. Kann Chemiluminiscence study of the stabilization of PVC |
||
| 12:30 - 13:30 Lunch | |||
| 14:00 | Excursion and informal dinner | ||
| LECTURE SESSION 8 | Chairpersons: | A. Okuwaki (Japan) M. Edge (U.K.) |
|||
| 09:00 | Main lecture
ML 7 H. Bockhorn (Germany) |
||||
| 09:50 | Special
lecture SL 17 H. Ohtani, Y. Taguchi, Y.
Ishida, S. Tsuge, H. Matsubara (Japan) |
||||
| 10:15-10:35 Coffee break | |||||
| LECTURE SESSION 9 | Chairpersons: | I. Tincul (South
Africa) B. Abu-Sharkh (Saudi Arabia) |
|||
| 10:35 | Special
lecture SL 18 L.Yu. Smoliak, N.R.
Prokopchuk, Yu.P. Losev (Belarus) |
||||
| 11:00 | Special
lecture SL 19 J. Pospíšil, J. Pilař,
A. Marek, Z. Horák, S. Nešpůrek (Czech Republic) |
||||
| 11:25 | Special
lecture SL 20 L. Costa, P. Bracco, E.M.
Brach del Prever, M.P. Luda (Italy) |
||||
| 11:50 | Special
lecture SL 21 M. Danko, Š.Chmela, P. Hrdlovič
(Slovak Republic) |
||||
| 12:30 – 13:30 Lunch | |||||
| LECTURE SESSION 10 | Chairpersons: | P. Hrdlovič (Slovak
Republic) J. Kovářová (Czech republic) |
|
| 14:00 | Main lecture
ML 8 M. Edge, N.S. Allen (U.K.) |
||
| 15:15 | Closing remarks | ||
Abu-Sharkh B. SL07
Aglietto M. SL09
Allen N.S. ML08, SL05, P01, P02, P29
Antoš K. P33
Assadi R. SL11
Audouin L. P15, P16
Baba M. P13
Bakoš D. P11
Baldrian J. P12, P22
Barcelona A. P02
Barrio J.A. SL05, P01
Bartha L. P44, P46, P47
Bartoníček B. P23
Benavides R. P19
Bergeret A. P39, SL06
Bernášková A. P07
Bigger S.W. ML01, P52, P53
Billingham N.C. ML01, SL02, P52, P53
Bíró S. P44, P46,P47
Bockhorn H. ML07, P17
Bourmaud A. SL08
Bracco P. SL20
Brach del Prever E.M. SL20
Brožek J. P07, P22
Campo I. P02
Castañeda-Facio A.O. P19
Cataldo F. P27
Chan C.H. SL15
Chmela Š. P34, P35, SL21
Chromcová D. P07
Cibelli S. P41
Cibulková Z. P14
Clerc L. P39
Colin X. SL11
Coltelli M.-B. SL09
Costa L. SL20
Crespy A. SL06
Danko M. SL21
Deák G. P44, P46, P47
Di Maio L. P41
Divers T. P06
Ducháček V. P40
Edge M. ML08, P01, P02, SL05
Epacher E. P31, SL04
Fantó E. P46, P47
Fayolle B. P15, P16
Fearon P.K. ML01, P52, P53
Fellahi S. SL14
Feller J.-F. SL08, P06
Ferry L. SL06
Földes E. P30
Fontan E. P01, P29
Fortelný I. P51, SL12
Foulc M.P. SL06
Fraga A. P45
Fratričová M. P14
Galan C. P02
García D. P42
Gardette J.-L. ML02, P05
Geiger A. P44, P46, P47
Gijsman P. SL01
Grespy A. SL06
Grigg M.N. ML01
Grob M.C. SL16
Grohens Y. P06, SL08
Habicher W.D. P34, P35
Hamskog M. SL01
Hnát V. P23
Hoang E.M. P29
Hoffmann J. P11
Honda Y. P09, SL13
Horák Z. SL19
Hradil J. P50
Hrdlovič P. P34, SL21
Hromádková J. P32
Iannoni A. P20
Ienny P. SL06
Incarnato L. P41
Ishida Y. SL17
Ismail J. SL15
Janecska A. P30
Jiménez A. P20, P21, P42, P45
Jóver B. P44
Julinová M. P11
Jůza J. P49
Kaczmarek H. P04, P18
Kammer H.W. SL15
Kann Y. SL02
Kaprálková L. P37
Karayildirim T. P17
Ke-Ke Yang P54
Kelnar I. P37
Kenny J.M. P20
Kimura T. SL13, P08
Kiss C. SL04
Kósa Cs. P34, P35
Kotek J. P12
Kovářová J. P12, P26, P50, P51
Kowalonek J. P18
Kröhnke C. SL10
Kroutilová I. P40
Kruliš Z. P32, SL12
Křivka I. P24, P25
Kubies D. P12
Kuta A. P40
La Mantia F.P. ML05
Lacík I. SL03
Laga R. P07
Leroy E. P39
Liauw C.M. P01, P29
Liptaj T. P13
Lobo V.M.M. P21
Lopez Cuesta J.M. P39
López J. P42
Losev Yu.P. SL18
Luda M.P. SL20
Lukáč I. P34
Luzuriaga S. P51
Malík J. SL10
Maloschik E. P30
Marek A. P37, SL19
Marino G. P29
Martínez-Pardo M.E. P19
Martínez-Zaporta M.A. P01
Matisová-Rychlá L. SL03, P53
Matsubara H. SL17
Mayne N. ML04
Meszároš O. P38
Michálková D. SL12
Miskolczi N. P44, P46, P47
Montesano S. P41
Morel M. P13
Morlat S. P05
Mosnáček J. P34
Mourelatou D. P01, SL05
Muraoka K. P09, SL13
Nagy G. P30, P31
Náhlík J. P07, P10
Nešpůrek S. P38, SL19
Ohashi Y. SL13
Ohtani H. SL17
Okuwaki A. ML06
Omastová M. P26, P27
Orbán-Mester A. P31
Parellada M.D. SL05
Perlaki R. P47
Perrin D. P39
Pilař J. P37, SL19
Pilichowski J.F. P13
Pionteck J. P27
Plaček V. P23
Plchotová L. P10
Pospíšil J. P37, P38, SL19
Prokeš J. P24, P25, P26
Prokopchuk N.R. P36, P43, SL18
Prokopová I. P10
Prokůpek L. P48
Puffr R. P12, P22
Pukánszky B. P30, P31, SL04
Qian Zhou P55
Rivaton A. ML02
Roda J. P07
Ruiz V. P02
Ruiz Santa Quiteria V. SL05
Ruseckaite R.A. P45
Rybyšar P. P48
Rychlý J. SL03, P53
Rypáček F. P12
Saffidine Z. SL14
Saglam M. P17
Sánchez-Adame M. P19
Sato S. P09, SL13
Savi S. SL09
Scaffaro R. ML05
Sedlář J. P33
Sedlařík V. P11
Schmidt P. P38
Sionkowska A. P03, P04, P18
Skolil J. P10
Skopińska J. P04
Slovák K. SL03
Smoliak L.Yu. P36, P43, SL18
Sobral A.J.F.N. P21
Staniek P. P31, SL04, SL10
Starý Z. P32
Starykov O. P25
Stefani P.M. P42
Stejskal J. P24, P25, P26, P28
Šašek V. P07, P10
Šeděnková I. P28
Šimon P. P14
Šlouf M. P32
Špátová J. P22
Taguchi Y. SL17
Terselius B. SL01
Theumer G. P35
Tincul I. ML03
Tobolková E. P24, P28
Tolkach O.Ya. P43
Torre L. P20
Trchová M. P24, P26, P28
Tsuge S. SL17
Valente A.J.M. P21
Večeřa M. P48
Verdu J. P15, P16, SL11
Vlčková E. P10
Vraštil J. P48
Watanabe T. P08, P09, SL13
Wilkinson A.N. SL05, SL13, P01,P02
Wisniewski M. P04
Xiu-Li Wang P54
Yanik J. P17
Yao Zheng P55
Yu-Zhong Wang P54, P55
Yuksel M. P17
Zaporozhets T. P12
Fellahi Said, Algerian Institute of Petroleum Sonatrach, Polymer Engineering Dept., Av. du 1er Novembre, 35 000 Boumerdes
Mayne Neil, Association of Plastics Manufacturers in Europe, Av. E. Van Nieuwenhuyse 4, B-1160 Brussels
Smoliak Leonid, Belorussian State Technological University, 13-A. Sverdlova St., 220050 Minsk
Antoš Kamil, Masaryk University, Soběšická 126, CZ-638 00 Brno
Brožek Jiří, Department of Polymers, Institute of Chemical Technology, Technická 5, CZ-166 28 Praha 6
Chromcová Daniela, Department of Polymers, Institute of Chemical Technology, Technická 5, CZ-166 28 Praha 6
Fortelný Ivan, Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, Heyrovského nám. 2, CZ-162 06 Praha 6
Hnát Vladimír, Nuclear Research Institute Řež 130, CZ-250 68 Řež
Horák Zdeněk, Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, Heyrovského nám. 2, CZ-162 06 Praha 6
Hradil Jiří, Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, Heyrovského nám. 2, CZ-162 06 Praha 6
Julinová Markéta, Faculty of Technology, University of Tomáš Bata in Zlín, CZ-762 72 Zlín
Jůza Josef, Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, Heyrovského nám. 2, CZ-162 06 Praha 6
Kalousková Radka, Department of Polymers, Institute of Chemical Technology, Technická 5, CZ-166 28 Praha 6
Kotek Jiří, Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, Heyrovského nám. 2, CZ-162 06 Praha 6
Kovářová Jana, Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, Heyrovského nám. 2, CZ-162 06 Praha 6
Kráčalík Milan, Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, Heyrovského nám. 2, CZ-162 06 Praha 6
Kruliš Zdeněk, Institute of Macromolecular Chemistry Academy of Sciences of the Czech Republic, Heyrovského nám. 2, CZ-162 06 Praha 6
Kubies Dana, Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, Heyrovského nám. 2, CZ-162 06 Praha 6
Kuta Antonín, Department of Polymers, Institute of Chemical Technology, Technická 5, CZ-166 28 Praha 6
Lednický František, Institute of Macromolecular Chemistry, of Academy of Sciences of the Czech Reppublic, Heyrovského nám. 2, CZ-162 06 Praha 6
Lánská Božena, Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, Heyrovského nám. 2, CZ-162 06 Praha 6
Marek Antonín, Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, Heyrovského nám. 2, CZ-162 06 Praha 6
Meszároš Oto, Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, Heyrovského nám. 2, CZ-162 06 Praha 6
Pilař Jan, Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, Heyrovského nám. 2, CZ-162 06 Praha 6
Pospíšil Jan, Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, Heyrovského nám. 2, 162 06 Praha 6
Prokopová Irena, Department of Polymers, Institute of Chemical Technology, Technická 5, CZ-166 28 Praha 6
Puffr Rudolf, Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, Heyrovského nám. 2, CZ-162 06 Praha 6
Rais David, Faculty of Mathematics and Physics, Charles University, V Holešovičkách 2, CZ-180 00 Praha 8
Rotschová Jitka, Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, Heyrovského nám. 2, CZ-162 06 Praha 6
Rybníček Jan, Czech Technical University in Prague,
Faculty of Mechanical Engineering, Department of Materials
Engineering, Karlovo nám. 13,
CZ-121 35 Prague 2
Rybyšar Petr, University of Pardubice, nám. Čs. Legií 565, CZ-532 10 Pardubice
Starý Zdeněk, Institute of Macromolecular Chemistry Academy of Sciences of the Czech Republic, Heyrovského nám. 2, CZ-162 06 Praha 6
Starykov O., Faculty of Mathematics and Physics, Charles University, Ke Karlovu 5, CZ-121 16 Praha 2
Stejskal Jaroslav, Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, Heyrovského nám. 2, CZ-162 06 Praha 6
Strnadová Jaroslava, Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, Heyrovského nám. 2, CZ-162 06 Praha 6
Tobolková E., Faculty of Mathematics and Physics, Charles University, Ke Karlovu 5, CZ-121 16 Praha 2
Trchová Miroslava, Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, Heyrovského nám. 2, CZ-162 06 Praha 6
Vraštil J., University of Pardubice, Čs. Legií 565, CZ-532 10 Pardubice
Zaporozhets Tatyana, Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, Heyrovského nám. 2, CZ-162 06 Praha 6
Šeděnková I., Faculty Mathematics and Physics, Charles University, V Holešovičkách 2, CZ-180 00 Praha 8
Audouin Ludmila, SERAM Laboratoire LTVP de l´ENSAM, 151,
Blvd. de l´Hôpital,
F-75013 Paris
Bergeret Anne, Ecole des Mines d'Alès, CMGD, 6 Av. de Clavières, F-30319 Alès Cédex
Colin Xavier, Laboratoire de Transformation et de
Vieillissement des Polymères, Ecole Nationale Supérieure des
Arts et Métiers, 151 Blvd. de l‘Hôpital,
F-75013 Paris
Divers Thomas, Laboratoire Polymères et Procédés, Université de Bretagne Sud, Rue de Saint-Maudé, F-56321 Lorient Cédex
Fayolle Bruno, SERAM Laboratoire LTVP de l´Hopital, 151,
Blvd. de l´Hôpital,
F-75013 Paris
Feller Jean-François, Laboratoire Polymères et Procédés, Université de Bretagne Sud, Rue de Saint-Maudé, F-56321 Lorient Cédex
Gardette Jean-Luc, Laboratoire de Photochimie Moléculaire et Macromoléculaire, Université Blaise Pascal, F-63177 Aubiere
Grohens Yves, Laboratoire Polymères et Procédés, Université de Bretagne Sud, Rue Saint-Maudé, F-56321 Lorient Cédex
Kröhnke Christoph, Clariant Huningue SU TIM, Rue de
l´Industrie,
F-68331 Huningue
Morlat Sandrine, Université Blaise Pascal - CNRS Laboratoire de Photochimie, Av. des Landais, F-63170 Aubière
Pilichowski Jean Francois, Laboratoire de Photochimie, UMR 6505 du CNRS, Université B. Pascal, Les Cézeaux, F-63177 Aubière
Bockhorn Henning, Institut für Chemische Technik, Universität Karlsruhe, Kaiserstrasse 12, D-76128 Karlsruhe
See Guat Li, University of Applied Sciences, D-49076 Osnabrück
Bíró Szabolcs, Department of Hydrocarbon Processing, University of Veszprém, Egyetem St.10, H-8200 Veszprém
Epacher Edina, Department of Plastics and Rubber Technology, Budapest University of Technology, Müegyetem rkp 3, H-1111 Budapest
Geiger Andras, Department of Hydrocarbon Processing, University of Veszprém, Egyetem St. 10, H-8200 Veszprém
Miskolczi Norbert, University of Veszprém, Egyetem St. 10, H-8201 Veszprém
Pukánszky Béla, Department of Plastics and Rubber Technology, Budapest University of Technology, Müegyetem rkp 3, H-1111 Budapest
Cerasi Francesco, Polimeri Europa s.p.a., San Donato Milanese,
Via Jannozzi 1,
I-20097 Milano
Coltelli Maria-Beatrice, Department of Chemistry, University
of Pisa,
Via Risorgimento, 35, I-56126 Pisa
Costa Luigi, Dipartimento di Chimica IFM, Universitá di
Torino, Via Giuria 7,
I-10125 Torino
La Mantia Francesco Paolo, Dipartimento Ingegneria Chimica, Universitá di Palermo, Viale delle Scienze, I-90128 Palermo
Profaizer Mauro, Sanpellegrino-Nestlé C/O Levissima, Via
Castelvetro 17/23,
I-20154 Milano
Vitarelli Giacomo, Cytec Industries, Via Sporting Mirasole 4, Noverasco Di Opera, I-20090 Milano
Incarnato Loredana, Deptartment of Chemical and Food Enginnering, University of Salermo, Via Ponte don Melillo, I-84084 Fisciano
Kimura Toshiaki, Bio Research Laboratory, Future Project Division, Toyota Motor Corporation, 1, Toyota-cho, Toyota, Aichi 471-8572
Ohtani Hajime, Department of Applied Chemistry Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya, 464-8603
Okuwaki Akitsugu, Department of Applied Chemistry Graduate School of Engineering, Tohoku University, Aramaki Aoba 07, Aoba-ku Sendai, 980 8579
Sato Shin, Wood Research Institute, Kyoto University, Gokasho, Uji, Kyoto, 611-0011
Watanabe Takashi, Wood Research Institute, Kyoto University, Gokasho, Uji, Kyoto, 611-0011
Chan Chin Han, School of Chemical Sciences, University
Sciences Malaysia,
11800 Minden
Benavides Roberto, Centro de Investigación en Química Aplicada, Blvd. Enrique Reyna H. 140, 25100 Saltillo, Coahuila
Gijsman Pieter, DSM Research, 6160 MD Geleen
Wang Yu-Zhong, Sichuan University School of Chemistry, 29
Wangjiang Road,
610064 Chengdu
Sionkowska Alina, Faculty of Chemistry, Nicolaus Copernicus University, Gagarin 7 st., PL-87-100 Toruń
Abu-Sharkh Basel, KFUPM, Department of Chemical Engineering, 31261 Dhahran
Chmela Štefan, Polymer Institute, Slovak Academy of Sciences,
Dúbravská cesta 9,
SK-842 36 Bratislava
Hrdlovič Pavol, Polymer Institute, Slovak Academy of
Sciences, Dúbravská cesta 9,
SK-842 36 Bratislava
Kósa Csaba, Polymer Institute, Slovak Academy of Sciences,
Dúbravská cesta 9,
SK-842 36 Bratislava
Omastová Mária, Polymer Institute, Slovak Academy of
Sciences, Dúbravská cesta 9,
SK-842 36 Bratislava
Rychlá Lyda, Polymer Institute, Slovak Academy of Sciences,
Dúbravská cesta 9,
SK-842 36 Bratislava
Rychlý Josef, Polymer Institute, Slovak Academy of Sciences,
Dúbravská cesta 9,
SK-842 36 Bratislava
Šimon Peter, Department of Physical Chemistry, Faculty of Chemical and Food Technology, Slovak Technical University, Radlinského 9, SK-812 37 Bratislava
Tincul Ioan, Sasol Technology R&D, P.O.Box 1, 1947 Sasolburg
Jimenez Alfonso, University of Alicante, Department of Analytical Chemistry, P.O.Box 99, E-03080 Alicante
Hamskog Mikael, School of Engineering, Kristianstad
University, Elmetorpsv 15,
S-291 88 Kristianstad
Grob Markus C., Ciba Specialty Chemicals Inc., Head Skill
Center Extrusion,
CH-4002 Basel
Yanik Jale, Facuty of Science, Department of Chemistry, Ege
University,
TR-35100 Izmir
Kann Yelena, Lynn Plastics Co. LLC, 92 Brookline St., Lynn, MA 01902
Allen Norman S., Centre for Materials Science Research, Faculty of Sciences and Engineering, Manchester Metropolitan University, Chester Street, Manchester, Lancs, M1 5GD
Barcelona Adriana, Centre for Materials Science Research, Faculty of Sciences and Engineering, Manchester Metropolitan University, Chester Street, Manchester, Lancs, M1 5GD
Billingham Norman C., The School of Chemistry Physics and Environmental Sciences, University of Sussex, Brighton BN1 9QJ
Edge Michele, Centre for Materials Science Research, Faculty of Sciences and Engineering, Manchester Metropolitan University, Chester Street, Manchester, Lancs, M1 5GD
Fearon Peter K., The School of Chemistry Physics and Environmental Sciences, University of Sussex, Brighton BN1 9QJ
Mourelatou Despina, Centre for Materials Science Research, Faculty of Sciences and Engineering, Manchester Metropolitan University, Chester Street, Manchester, Lancs, M1 5GD
Gardette J.-L. Mrs France
Grob Carmelina Switzerland
La Mantia F.P. Mr Italy
Pilichowski Maria-Claude France
Sachiko-Okuwaki Japan
Zheng Yao P.R. China
Horák Zdeněk, Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, Heyrovského nám. 2, CZ-162 06 Praha 6
Marek Antonín, Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, Heyrovského nám. 2, CZ-162 06 Praha 6
Rybníček Jan, Czech Technical University in Prague, Faculty
of Mechanical Engineering, Department of Materials Engineering,
Karlovo nám. 13,
CZ-121 35 Prague 2
See Guat Li, University of Applied Sciences, D-49076 Osnabrück
Poster session, Wednesday, 16 July
| P 56 | J. Rybníček, J. Steidl, Z.
Kořínek Recycling of polycarbonate car headlight lenses |
| P 57 | Y. Kann Chemiluminiscence study of the stabilization of PVC |
