Fyzikální ústav Akademie věd ČR

Using the PALS iodine laser system, Au ions with the charge state up to 58+ and with the kinetic energy as high as ~300 MeV were generated. The production of these ions was tested in dependence on the laser frequency (1ω, 3ω), on the irradiation/detection angles (0°, 30°), on the focus position with regard to the target surface, and on the target thickness (500 µm, 200 µm, 80 µm).  The full text >>

Repeated plasma outbursts were recognized at our analyzing currents of the fast carbon and fluorine ions produced with the sub-nanosecond PALS laser beam focused onto polytetrafluoroethylene and polyethylene targets. The deconvolution of ion collector signal made the determination of the ion temperature as well as the effective voltage accelerating the fast ions possible. The value of the accelerating voltage decreases with increasing ion outburst number; the highest value of this voltage was about 800 kV.

This result is devoted to investigations of laser energy transfer into solid targets with respect to the focusing lens focal point position relative to the solid target surface as obtained at the PALS laser facility. The third harmonic of the PALS laser beam with energy ~90 J and pulse duration ~250 ps (FWHM) was used for irradiation of two kinds of targets made of Cu: a slab and a 3.6 µm thick foil. The focal point of the beam was located either inside or in front of the target surface, and care was taken to ensure the same laser spot radii in both cases (250 µm).  The full text >>

Iodine photodissociation laser SOFIA