link placeholder
link placeholder  link placeholder  link placeholder
Ikona české vlajky

Ústav teoretické a aplikované mechaniky Akademie věd ČR

ITAM AS CR, v. v. i.
Prosecká 809/76
190 00 Praha 9
tel.: +420 286 882 121
fax: +420 286 884 634
e-mail: itam@itam.cas.cz
map
number of visitors:

Conferences


Select a conference year:
past conferences
  
future or running conferences
  




2015

Organizer:Institute of Theoretical and Applied Mechanics AS CR, v.v.i
Name:Performance of Piles under Seismic Impacts from PBEE and Reliability Analyses Using EQWEAP Procedures
Date:
26.11.2015 - 26.11.2015
Contact person: Cyril Fischer, PhD.

we are honoured to invite you to a lecture by

Prof. Der-Wen Chang, Tamkang University, Taiwan
spekaing on:

Performance of Piles under Seismic Impacts from PBEE and Reliability Analyses Using EQWEAP Procedures

Thursday, November 26, at 10:00 AM
ITAM, AS CR, Prosecká 76, Prague 9

Abstract: Seismic behavior and performance of the piles can be studied using simplified one-dimensional wave equation analysis called EQWEAP. This solution was found compatible with the rigorous FEM solutions. Using such analysis, the performance based seismic design of the pile foundation becomes easily accessible. This presentation will mainly discuss the methods used in this approach with the probability and reliability based analyses to evaluate the seismic resistance of the pile foundation under various seismic hazard concerns.

About the speaker: Prof. Der-Wen Chang works in the Department of Civil Engineering at Tamkang University. His research is concentrated on Soil Dynamics, Geotechnical Earthquake Engineering and Soil-Structure Interactions, in particular on

  • Dynamic Modelling of Pile Behaviours Using Wave Equations
  • Performance Based Seismic Design of Piles
  • Simulation and Data Interpretation of Passive Ground Anchor Failures
  • Modelling of SASW, FWD Testing on Pavements


Organizer:Institute of Theoretical and Applied Mechanics AS CR, v.v.i
Name:Engineering Mechanics 2015
Date:
11.5.2015 - 14.5.2015
Contact person: Cyril Fischer, PhD.
The objective of the 21th conference is to provide a forum for researchers to discuss the state-of-the-art in Mechanics of Solids, Fluids and Thermomechanics, this particularly in connection with problems under investigation in the Czech Republic.


2014

Organizer:Institute of Theoretical and Applied Mechanics AS CR, v.v.i
Name:Lime nano-materials and their application for conservation of historic monuments made of Leitha limestone
Date:
14.10.2014 - 14.10.2014
Contact person:MgA. Michaela Navrátilová
The workshop Lime nano-materials and their application for conservation of historic monuments made of Leitha limestone will be held on Tuesday, October 14, 2014, in Telč.
It is is organized by ITAM - Centre of Excellence Telč, Faculty of Restoration University of Pardubice. Invited guests from our project partner Institute for Arts and Technology, University of Applied Arts Wienna will present their experiences in this field of conservation.
For more details, see http://www.nanolithproject.eu/ or the programme.pdf.
Place: Lanner house, Hradecká 6, Telč 588 56
Date:14.10. 2014, 09:30 – 17:00
Contact person: Michaela Navrátilová workshop@nanolithproject.eu.


Organizer:Institute of Theoretical and Applied Mechanics AS CR, v.v.i
Name:YSESM 2014 13th Youth Symposium on Experimental Solid Mechanics
Date:
29.6.2014 - 2.7.2014
Contact person:Eng. Petr Zlámal
The YSESM symposium provides a forum for young researchers and engineers, PhD students and students dealing with subjects of experimental mechanics.

Scope & Topics
The Symposium concentrates on current work in all areas of experimental research and its application in solid and fluid mechanics.
The topic will particularly concern to:
Conventional and Advanced Experimental Methods in Solid and Fluid Mechanics — Non-Destructive Testing and Inspection — Measurements in Material Science — Computer Assisted Testing and Simulation — Engineering Design Simulation — Hybrid Methods, Experimental Techniques – Numerical Simulation — Optical Methods and Image Processing — Measurements in Biomechanics — Sensor Techniques for Micro- and Nano-Applications


Organizer:Institute of Theoretical and Applied Mechanics AS CR, v.v.i
Name:XIVth Bilateral Czech/German Symposium
Date:
4.6.2014 - 7.6.2014
Contact person: Ondřej Jiroušek, Eng., PhD
The objective of the bilateral symposium is to bring together mainly young scientists, who are actively involved in experimental solid mechanics, theoretically and practically, in order to exchange experience, to report on the present state-of-the-art as well as on running research projects, to discuss due questions and problems and to promote the co-operation between individuals as well as between institutions. Symposium will take place in Wuppertal a beautiful city in North Rhine-Westphalia, Germany known for its steep slopes, its woods and parks, and its suspension railway, the Wuppertal Schwebebahn. It is located east of Düsseldorf and south of the Ruhr area around the river Wupper.


2013

Organizer:Institute of Theoretical and Applied Mechanics AS CR, v.v.i
Name:International Conference on Interdisciplinary Research Cooperation
Date:
30.10.2013 - 1.11.2013
Contact person:prof. Miloš Drdácký, PhD., DSc.
The conference is aiming at supporting interdisciplinary scientific collaboration in the area of Cultural Heritage. The conference should offer a scope for generation of new research ideas and projects based on presentations of keynote lectures by renown international experts, of results of international research including research carried out at the Institute of Theoretical and Applied Mechanics, and last but not least based on discovering the potential of the newly open Centre of Excellence in Telč, which will be hosting this event.


2012

Organizer:Institute of Theoretical and Applied Mechanics AS CR, v.v.i
Name:XIIIth Bilateral Czech/German Symposium
Date:
4.6.2012 - 8.6.2012
Contact person: Ondřej Jiroušek, Eng., PhD
The objective of the bilateral symposium is to bring together mainly young scientists, who are actively involved in experimental solid mechanics, theoretically and practically, in order to exchange experience, to report on the present state-of-the-art as well as on running research projects, to discuss due questions and problems and to promote the co-operation between individuals as well as between institutions. Symposium will take place in Centre of Excelence Telč (CET). Telč is one of the most beautiful towns in the Czech Republic, added to the UNESCO list of world cultural heritage in 1992.


Organizer:Institute of Theoretical and Applied Mechanics AS CR, v.v.i
Name:Engineering Mechanics 2012
Date:
14.5.2012 - 17.5.2012
Contact person: Cyril Fischer, PhD.
The objective of the 15 th ENGINEERING MECHANICS conference is to provide a forum for researchers to discuss the state-of-the-art in Mechanics of Solids, Fluids and Thermomechanics, this particularly in connection with problems under investigation in the Czech Republic.


2010

Organizer:Institute of Theoretical and Applied Mechanics AS CR, v.v.i
Name:2nd Historic Mortars Conference
Date:
22.9.2010 - 24.9.2010
Contact person:Jan Válek, Ph.D.
An objective of the 2nd Historic Mortars Conference is to bring together scientists, technicians and professionals involved in research and studies of historic mortars to present and discuss advances in this topic. The main theme of the conference is the conservation of historic buildings and works of art, i.e. studying mortars with respect to repair. This a unifying field where a truly interdisciplinary collaboration is needed and where contributions of archaeologist, architects, civil and structural engineers, geologists, material scientists, chemists, conservation scientists and art restorers interested in mortars should have their place. Special focus of the conference will be on application research and technical knowledge to conservation practice and vice versa in its reflection on such recommendations.


Organizer:Institute of Theoretical and Applied Mechanics AS CR, v.v.i
Name:XIIth Bilateral German/Czech Symposium
Date:
30.6.2010 - 3.7.2010
Contact person: Ondřej Jiroušek, Eng., PhD
The objective of the bilateral symposium is to bring together mainly young scientists, who are actively involved in experimental solid mechanics, theoretically and practically, in order to exchange experience, to report on the present state-of-the-art as well as on running research projects, to discuss due questions and problems and to promote the co-operation between individuals as well as between institutions. Symposium will take place in Bremen, a beautiful Hanseatic city in northwestern Germany.


2009

Organizer:Institute of Theoretical and Applied Mechanics AS CR, v.v.i
Name:Engineering Mechanics 2009
Date:
11.5.2009 - 14.5.2009
Contact person: Cyril Fischer, PhD.
The objective of the 15 th ENGINEERING MECHANICS conference is to provide a forum for researchers to discuss the state-of-the-art in Mechanics of Solids, Fluids and Thermomechanics, this particularly in connection with problems under investigation in the Czech Republic.


2006

Organizer:Institute of Theoretical and Applied Mechanics AS CR, v.v.i
Name:I-SAMCO workshop
Date:
18.9.2006 - 19.9.2006
Contact person:assoc. prof. Stanislav Pospíšil, Ph.D.
Advances in structural monitoring of historical and modern structures


Organizer:Institute of Theoretical and Applied Mechanics AS CR, v.v.i
Name:7th EC Conference SAUVEUR
Date:
31.5.2006 - 3.6.2006
Contact person:Jan Válek, Ph.D.
Safeguarded Cultural Heritage. Understanding and Viability for the Enlarged Europe.


Organizer:Institute of Theoretical and Applied Mechanics AS CR, v.v.i
Name:ENGINEERING MECHANICS 2006
Date:
15.5.2006 - 18.5.2006
Contact person:Jiří Náprstek, DSc. PhD.
The objective of the 12 th conference is to provide a forum for researchers to discuss the state-of-the-art in Mechanics of Solids, Fluids and Thermomechanics, this particularly in connection with problems under investigation in the Czech Republic. Problems of Engineering Mechanics related to the contemplated topics can be discussed, and their solutions presented, during the sessions of the Conference, held at the Hotel of the ŽĎAS, a.s., situated in the beautiful countryside of the Žďár Highlands.


Organizer:Institute of Theoretical and Applied Mechanics AS CR, v.v.i
Name:X. Bilateral German / Czech Symposium
Date:
2.5.2006 - 5.5.2006
Contact person:Jitka Jírová, PhD.
The bilateral symposium shall bring together mainly young scientists, who are actively involved in experimental solid mechanics, theoretically and practically, in order to exchange experience, to report on the present state-of-art as well as on running research projects, to discuss due questions and problems and to promote the co-operation between individuals as well as between institutions. Therefore in the symposium discussions will play a highly significant role.


2005

Organizer:Institute of Theoretical and Applied Mechanics AS CR, v.v.i
Name:The Fourth European-African Conference on Wind Engineering
Date:
11.7.2005 - 15.7.2005
Contact person: Cyril Fischer, PhD.
The fourth European & African Conference on Wind Engineering (EACWE4) represents a continuation to the series of conferences held at Guernsey 1993, Genova 1997, Eindhoven 2001. The meeting will bring together engineers, researchers, university teachers and students and will create an opportunity to exchange scientific, technical and experimental results and ideas in wind engineering.



number of records= 16

© ITAM AS CR, v. v. i. 2008 | log in ( for employees only)