In contrast to the other analytical tools, there is no strict workflow in gpaGUI (see GUI below). Still, some hint of how the tool can be cotrnolled, can be found below.
If you are not familiar with GPA, you might like the paper Geometric phase analysis of high resolution electron microscope images by M.J. Hÿtch. which can be found here. In this brilliant work, all the necessary equations are explained and illustrated with examples. The reference can be obtained any time in gpaGUI main menu in
In order to demonstrate how gpaGUI operates, a sample image is provided and loaded by default. Your own micrographs can be loaded using the
If the image contains metadata with the image resolution, it is loaded and can be seen in the
You can let gpaGUI to parse scalebars burnt into the image via
The sample material can be changed at any time during the analysis. Details about material database and selection can be found here.
Only a small portion of the frequential information (FFT or artificial diffractogram in other words) is used in GPA. Typically, it is a small circular region around a diffraction reflection, which carries the information we are after. For some quantities (e.g. d-spacing map) only one diffraction spot is needed while for another (e.g. strain or misplacement) two different reflections must be selected at a time. Therefore there are two sets of similar controls in gpaGUI window - the left half of the window allows for analysis of one reflection, the right half for analysis of another.
The reflection of interest can be selected by clicking into the small FFT image in the
Accuracy and repeatability of GPA results depends on how precisely the reflection is localized. Therefore it might be helpful to take the full advantage of another CrysTBox tool - diffractGUI, which offers an accurate localization and identification of the depicted reflections. To perform this analysis, click the button
After completing the analysis, a number of blue crosses apears in the FFT image. Each cross corresponds to an identified reflection. After clicking at one, the mask is accurately centered to the reflection position, the cross turns green and the plane indices are shown below the image (see aside).
After picking one or two reflections, use the pop-up menu to select the quantity to be show in the view below (see aside). If no reflection is selected, only HRTEM is available. One reflection allows you to calculate and show quantities including Filtered HRTEM (showing only the fringes corresponding to the selected reflection) or a d-spacing map (length, X and Y component). Finally, selecting two non-colinear reflections provide further options like strain or displacement map.
For many quantities (such as d-spacing or strain maps), the analyst is often interested in a rather limited range of values. On the other hand, the difference between the lowest and highest depicted values is much higher than the range of interest (often caused by artifacts). By default, thousands of colour shades representing the data are spread covering all the displayed values all the way from the lowest to the highest. This may result in the range of interest being only covered by a few similar shades making the important information lost in useless artifacts. To deal with this problem, the user can set the range of interest manually in the
HRTEM image | d-spacing map (default colour range) | d-spacing map (colour range reduced to 0.255 - 0.285 nm) |
There are several features in gpaGUI, which might help the user with data analysis and interpretation. Similarly to other CrysTBox tools, gpaGUI allows for zooming in and out via the mouse wheel. Since two different quantities can be visualized simultaneously in the left and right view, it may be beneficious to synchronize the view limits so that zooming in one view is instantly relfected in another. To enable this feature, tick the
Cursors are defined separately for each view, allowing the user to inspect one position in one view and a different position or even an ROI in another. Cursors in both views can be, however, synchronized in a way similar to the limits synchronization (described above). This synchronization can be enabled ticking the
Contents of both views can be exported in three ways (depicted below):
Preview not available for TIF |
||
Image only | Image with colourbar | Data |
Copyright © 2008-2014, Fyzikální ústav AV ČR, v. v. i.