Zpět na hlavní stránku Semináře ÚT
| Středa 7. 3. 2018, 10:00, posluchárna B | |
Catch the yield surface, experimentally, theoretically, and computationally |
|
| Dr. Li-Wei Liu, Department of Civil Engineering, National Taiwan University, Taipei 10617, Taiwan / Institute of Thermomechanics of CAS, v. v. i., Prague |
|
| The yield surface of a material is the boundary of the elastic region where every stress point inside the region result from the elastic response of the material. The experimental evidence shows that the yield surface changes position, size, shape, and orientation during the material undergoing the plastic loading which results in the permanent deformation. Based on the experimental observation, the modelling of the yield surface evolution is a key point to completely simulate the plastic behavior of the material. Most experiments of yield surface detection were conducted in the two-dimensional space (axial-torsional or bi-axial). Due to the complete stress space is six dimensional, detecting the yield surface in the space whose dimension is more than two can collect more detail of the yield surface evolution. For the experiment of yield surface detection, the determination of yield point underpins the accuracy of the geometry of the yield surface. Nowadays, test machines used for the experiments of yield surface detection are usually servo-controlled hydraulic system, hence the scatter of data should be taking into account in the determination of yield point. To this end, an automated yield stress determination based on the Weibull distribution is introduced. After conducting the experiment in the axial-torsional-hoop stress space, yield points are obtained according to the yield-stress determination and designed probing paths. To further capture the global information from these yield points and observe the evolution of yield surface during different pre-loading paths, a convex-closed-cubic polynomial, which is capable of description of the yield surface evolution, including translation, expansion/ contraction, rotation, affine deformation, and distortion in the three dimensional space, is proposed and the corresponding three-stage estimation for parameters of the polynomial is developed. This polynomial enable us to observe the yield surface evolution from the three dimensional point of view and it can also be a candidate of potential yield functions. Furthermore, the computation of elastoplastic models needs more attention to the special mathematical structure of the model containing ordinary differential equations, algebraic equations, and inequalities. Exploring the underlying structure of elastoplastic models shows part of them possesses internal symmetry that is the pseudo-sphere of real pseudo-Euclidean space Rp,q on which the proper orthochronous pseudo-orthogonal group SOo(p,q), a sub group of the Lie group, leaves acts. Based on the internal symmetry, a return-free integration is developed and it keeps the computed stress point on the yield surface automatically and exactly without any extra enforcement during the plastic deformation. | |
| 15. 2. 2018, 14:00, posluchárna B | |
Complementary near field technique for assessment of materials with added value |
|
| Dr. Adriana Savin, Head of Nondestructive Testing Department, National Institute of Research and Development for Technical Physics, Iasi, Rumunsko | |
| The National Institute of Research and Development for Technical Physics (NIRDTP) is a part of the national institutes R&D network coordinated by the Ministry of Research and Innovation - National Authority for Scientific Research and Innovation. Institute performs basic and applied research in the field of advanced materials with novel structures and properties, devices (i.e., sensors, transducers, actuators, measuring systems) based on advanced materials, new preparation methods and characterisation techniques, including non-destructive evaluation and magnetometry, electrical and magnetic separation, and devices for applications in engineering, healthcare, and biotechnology.
Nondestructive Testing Department (NDT) performs theoretical and applicative research in the field of electromagnetic testing of cylindrical and plate products including composite materials; calculation of the fields scattered by material discontinuities located at different areas of the multilayered medium by solving the forward problems; theoretical optimization of the operation of different types of sensors. Department also performs ultrasonic testing, development of specific methods for ultrasonic signal processing with FFT, digital filtering, neuro-fuzzy networks, development of the algorithms for defects localization and automaticclassification of flaws. In this lecture, a new possibility of using sensor with metamaterial lens for the nondestructive evaluation of metallic strip gratings and carbon fiber reinforced plastics will be presented. The sensor has enhanced spatial resolution due to the apparition of evanescent waves in the space between strips and between carbon fibers respectively, during the excitation by transversal electromagnetic field polarized along z-axis. The evanescent waves can be manipulated by a lens made from two conical Swiss rolls that act as a field concentrator. The detection has spatial resolution better than λ/2000. |
|
| 25. 1. 2018, 14:00 posluchárna B | |
Evolution and Verification of a Kinematic Hypothesis
|
|
| Prof. Herbert A. Mang, Institute for Mechanics of Materials and Structures, Vienna University of Technology | |
| Splitting of the strain energy into its “non-membrane” and membrane percentage provides insight into the load-carrying mechanism of structures, subjected to proportional loading. It may be useful, for example, for sensitivity analysis of the initial post-buckling behavior of beams, arches, plates, and shells, and assemblies of such structures. The task of this work is to determine this percentage without computing insignificant numbers such as the values of the strain energy and its membrane part. It is hypothesized that this percentage is proportional to the acceleration of a fictitious particle, moving along a curve on the unit sphere. The curve is described by the vertex of the normalized “fundamental eigenvector” of the so-called “consistently linearized eigenvalue problem”. The proportionality factor is obtained from the initial condition for the “non-membrane” percentage of the strain energy, hypothesized as twice the initial velocity of the particle. The lower bound of this factor signals the constancy of this percentage with increasing load, whereas the upper bound indicates a monotonic increase or decrease up to its ab initio predictable value at a stability limit or to an unphysical asymptotic limiting value. The proof of the universal validity of the two hypotheses begins with their verification for the special cases of a membrane stress state and pure bending. The assertion that this is a sufficient condition for the universal validity of these hypotheses is subsequently verified for an example with a monotonically increasing “non-membrane” percentage of the strain energy. It is finally confirmed by an indirect proof of their validity for a non-monotonic course of this percentage. A by-product of this work are conditions for extreme values of the stiffness of structures, subjected to proportional loading. | |
Zpět na hlavní stránku Semináře ÚT
© 2008 – 2018 Ústav termomechaniky AV ČR, v. v. i. 
