In the short lecture an overview of digital image correlation (DIC) applied to strain measurement of samples loaded in mechanical tests in general will be given. Examples of using the method in several engineering applications will be given, extension of the method that enables to use it in 3D (using time-lapse tomography) will be introduced and examples of experiments performed on a wide range of materials, ranging from trabecular bone samples, whole bone samples (vertebral bodies) to metallic foams will be presented. A special attention will be given to high-strain rate loading using Split Hopkinson Pressure Bar technique.
Cellular solids, such as metal foams, hybrid foams, 3D printed lattices or additively manufactured auxetic structures are complex lightweight cellular materials with high energy absorption capabilities and possible functionally graded material properties. Thus, mechanical behavior of the materials under the representative loading conditions (i. e., dynamic impact, blast) has to be well understood. In this study, results of several experimental campaigns covering high-strain rate testing of cellular solids using conventional Split Hopkinson Pressure Bar (SHPB) and direct impact Open Hopkinson Pressure Bar (OHPB) are presented. High-speed imaging together with custom digital image correlation (DIC) technique are introduced as vital techniques for a complex experimental analysis of the materials at high strain-rates. Examples covering the evaluation of the displacement and strain fields, different methods for evaluation of Poisson’s ratio, and the analysis of the digital image correlation reliability are shown. Comparison of the digital image correlation results with the other methods (e. g. strain-gauges), its limitations and the actual challenges in this field are discussed. Overview of the experiments conducted at low and elevated temperatures observed using high-speed thermal imaging will be provided as well.
© 2008 – 2018 Ústav termomechaniky AV ČR, v. v. i. 
